Section

 

02

Using this unit

Using this unit

1 Press M.C. to display the setting mode.

 

SUB.W CTRL (subwoofer adjustment)

2 Turn M.C. to select the equalizer.

 

Only frequencies lower than those in the selected

POWERFUL—NATURAL—VOCAL—CUS-

 

range are outputted from the subwoofer.

TOM1—CUSTOM2—FLAT—SUPER BASS

 

1 Press M.C. to display the setting mode.

The equalizer band and equalizer level can be

 

2 Press M.C. to cycle between the following:

customized when CUSTOM1 or CUSTOM2 is

 

Cut-off frequency—Output level—Slope level

selected.

 

Rates that can be adjusted will flash.

If selecting CUSTOM1 or CUSTOM2, complete

 

3 Turn M.C. to select the desired setting.

the procedures outlined below. If selecting

 

Cut-off frequency: 50HZ—63HZ—80HZ—

other options, press M.C. to return to the pre-

 

100HZ—125HZ—160HZ—200HZ

vious display.

 

Output level: –24 to +6

! CUSTOM1 can be set separately for each

 

Slope level: –12— –24

source. However, each of the below combi-

 

 

 

BASS BOOST (bass boost)

nations are set to the same setting auto-

 

matically.

 

1 Press M.C. to display the setting mode.

!

USB, iPod, PANDORA (iPhone), and

 

 

2 Turn M.C. to select a desired level.

 

APP (iPhone)

 

 

 

0 to +6 is displayed as the level is increased or

!

BT AUDIO, PANDORA (smartphone),

 

 

decreased.

 

and APP (smartphone)

 

 

 

 

! CUSTOM2 is a shared setting used in com-

 

HPF SETTING (high pass filter adjustment)

mon for all sources.

 

Use this function when wanting to listen only to

3 Press M.C. to display the setting mode.

 

 

high-frequency sounds. Only frequencies higher

4 Press M.C. to cycle between the following:

 

 

than the high-pass filter (HPF) cutoff are output

Equalizer band—Equalizer level

 

 

from the speakers.

5 Turn M.C. to select the desired setting.

 

 

1 Press M.C. to display the setting mode.

Equalizer band: 80HZ—250HZ—800HZ—

 

 

2 Press M.C. to cycle between the following:

2.5KHZ—8KHZ

 

 

Cut-off frequency—Slope level

Equalizer level: +6 to –6

 

 

3 Turn M.C. to select the desired setting.

 

 

 

LOUDNESS (loudness)

 

 

Cut-off frequency: OFF—50HZ—63HZ—80HZ

Loudness compensates for deficiencies in the low-

 

—100HZ—125HZ—160HZ—200HZ

 

 

SLA (source level adjustment)

This function prevents the volume from changing too dramatically when the source switches.

!Settings are based on the FM volume level, which remains unchanged.

!The AM volume level can also be adjusted with this function.

!Each of the below combinations are set to the same setting automatically.

!USB, iPod, PANDORA (iPhone), and APP (iPhone)

!BT AUDIO, PANDORA (smartphone), and APP (smartphone)

1Press M.C. to display the setting mode.

2Turn M.C. to adjust the source volume. Adjustment range: +4 to –4

System menu

1

Press M.C. to display the main menu.

2

Turn M.C. to change the menu option

and press to select SYSTEM.

3

Turn M.C. to select the system menu

function.

Once selected, the following system menu func-

tions can be adjusted.

 

! INFO DISPLAY and BRIGHTNESS are not

 

available for DEH-X4600BT.

12H/24H (time notation)

1Press M.C. to select the desired setting. 12H (12-hour clock)—24H (24-hour clock)

INFO DISPLAY (sub information)

The type of text information displayed in the sub information section can be toggled.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting.

SPEANA—LEVEL METER—SOURCE—CLOCK

—OFF

!The signal bar indicator displays for SPEANA or LEVEL METER when the source is set to

RADIO.

AUX (auxiliary input)

Activate this setting when using an auxiliary device connected to this unit.

1Press M.C. to turn AUX on or off.

DIMMER (dimmer)

1Press M.C. to turn the dimmer on or off.

!You can also change the dimmer setting by pressing and holding /DIMMER.

BRIGHTNESS (brightness adjustment)

You can use this setting to adjust the display brightness.

The range of settings available for BRIGHTNESS will vary depending on whether DIMMER is on or

frequency and high-frequency ranges at low vol- ume.

1 Press M.C. to select the desired setting.

Slope level: –12— –24

! BT AUDIO, BT MEM CLEAR, BT VERSION

and APP CONN. SET are not available for

DEH-X3600S.

off. For details, refer to DIMMER (dimmer) on page 14.

1 Press M.C. to display the setting mode.

OFF (off)—LOW (low)—MID (mid)—HI (high)

SUB.W (subwoofer on/off setting)

This unit is equipped with a subwoofer output which can be turned on or off.

1Press M.C. to select the desired setting. NOR (normal phase)—REV (reverse phase)— OFF (subwoofer off)

14En

CLOCK SET (setting the clock)

1Press M.C. to display the setting mode.

2Press M.C. to select the segment of the clock display you wish to set.

Hour—Minute

3Turn M.C. to adjust the clock.

2 Turn M.C. to select the desired setting.

DIMMER on: 1 to 4

DIMMER off: 1 to 5

BT AUDIO (Bluetooth audio activation)

You need to activate the BT AUDIO source in order to use a Bluetooth audio player.

1Press M.C. to turn the BT AUDIO source on or off.