Pioneer DEH-X6600BT manual 12

Section
02	Using this unit

Using this unit

1 Press M.C. to start searching.		Bluetooth visibility can be turned on so that other
		devices can discover the unit.
!	To cancel, press M.C. while searching.
		1 Press M.C. to turn the visibility of this unit on
!	If this unit fails to find any available cellular
		or off.
	phones, NOT FOUND is displayed.
2 Turn M.C. to select a device from the device		PIN CODE (PIN code input)
list.		You must enter a PIN code on your device to con-
!	If the desired device is not displayed, select
		firm the Bluetooth connection. The default code is
	RE-SEARCH.
		0000, but you can change it with this function.
!	Press and hold M.C. to swap between the
		1 Press M.C. to display the setting mode.
	Bluetooth device address and the device
		2 Turn M.C. to select a number.
	name.
		3 Press M.C. to move the cursor to the next posi-
3 Press M.C. to connect the selected device.
		tion.
!	To complete the connection, check the de-
		4 After inputting PIN code, press and hold M.C.
	vice name (Pioneer BT Unit) and enter the
		! After inputting, pressing M.C. returns you
	PIN code on your device.
		to the PIN code input display, and you can
!	PIN code is set to 0000 as the default. You
		change the PIN code.
	can change this code.
!
	A 6-digit number may display on both this	DEV. INFO (Bluetooth device address display)
	unit and the Bluetooth device.
	Select yes if the 6-digit numbers displayed	1 Press M.C. to display the setting mode.
	on this unit and the Bluetooth device are	2 Turn M.C. to display the device information.
	the same.	Device name—Bluetooth device address
!	6-digit number appears on the display of	GUEST MODE (guest mode)
	this unit. Once the connection is estab-
	lished, this number disappears.	When this mode is turned on, if a pairing is at-
!	If you are unable to complete the connec-	tempted while there are already three devices
	tion using this unit, use the device to con-	paired together, the unit will move to the DEL DE-
	nect to the unit.	VICE screen automatically and prompt you to de-
!	If three devices are already paired, DEVICE-	lete a device. For details, refer to DEL DEVICE
	FULL is displayed and it is not possible to	(deleting a device from the device list) on page 11.
	perform this operation. In this case, delete	1 Press M.C. to turn the guest mode on or off.
	a paired device first.
		A. PAIRING (auto pairing)
A. CONN (connecting to a Bluetooth device auto-
		If this function is turned on while there is an
matically)
		iPhone connected to the unit by USB, you will be
1 Press M.C. to turn automatic connection on or		automatically prompted to pair the unit and
		iPhone.
off.
		1 Press M.C. to turn auto pairing on or off.
VISIBLE (setting the visibility of this unit)
		! This function may not be available depending
		on what version of iOS you are using.

Phone menu operation

1Press to display the phone menu.

2Turn M.C. to select the function.

Once selected, the following functions can be adjusted.

MISSED (missed call history)

DIALED (dialed call history)

RECEIVED (received call history)

1Press M.C. to display the phone number list.

2Turn M.C. to select a name or phone number.

3Press M.C. to make a call.

PHONE BOOK (phone book)

The contacts on your phone will normally be transferred automatically when the phone is con- nected. If it is not, use your phone menu to transfer the contacts. The visibility of this unit should be on when you use the phone menu. Refer to VISIBLE (setting the visibility of this unit) on page 12.

1Press M.C. to display SEARCH (alphabetical list).

2Turn M.C. to select the first letter of the name you are looking for.

3Press M.C. to display a registered name list.

4Turn M.C. to select the name you are looking for.

5Press M.C. to display the phone number list.

6Turn M.C. to select a phone number you want to call.

7Press M.C. to make a call.

PRESET1-6 (preset phone numbers)

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired preset number.

3Press M.C. to make a call.

!You can also use the preset number buttons 1/ to 6/ to recall a preset phone number. For more details about storing phone num- bers, refer to Storing and recalling phone num- bers on page 11.

PHONE FUNC (phone function)

You can set A. ANSR, R.TONE and PB INVT from this menu. For details, refer to Function and operation on page 12.

Function and operation

1 Display PHONE FUNC.

Refer to PHONE FUNC (phone function) on page 12.

2Press M.C. to display the function menu.

3Turn M.C. to select the function.

Once selected, the following functions can be adjusted.

A. ANSR (automatic answering)

1Press M.C. to turn automatic answering on or off.

R.TONE (ring tone select)

1Press M.C. to turn the ring tone on or off.

PB INVT (phone book name view)

1Press M.C. to invert the order of names in the phone book.

12En