Section

 

 

 

 

02

 

 

Using this unit

 

 

 

2 Turn M.C. to change the menu option

 

 

 

 

 

 

 

 

 

 

Using this unit

and press to select MIXTRAX.

 

 

The flashing color and MIXTRAX special effects

 

 

display change with changes in the sound and

 

 

 

 

3 Turn M.C. to select the MIXTRAX func-

 

 

bass levels.

 

 

1 Press M.C. to display the setting mode.

tion.

 

 

 

 

 

 

2 Turn M.C. to select the desired setting.

Once selected, the following MIXTRAX functions

 

 

 

 

! SOUND LEVEL 1 to SOUND LEVEL 6 – The

can be adjusted. The function is enabled when

 

 

 

 

 

flash pattern changes according to the

MIXTRAX is on.

 

 

 

 

 

 

sound level. Select a desired mode.

!

FLASH AREA and FLASH PATTERN are not

 

 

 

 

 

! LOW PASS 1 to LOW PASS 6 – The flash

 

available for DEH-X4600BT.

 

 

 

 

 

 

pattern changes according to the bass

!

MIX PATTERN is not available for DEH-

 

 

 

 

 

 

level. Select a desired mode.

 

X6600BS, DEH-X6600BT, DEH-X66BT and

 

 

 

 

!

RANDOM 1 – The flash pattern changes

 

DEH-X3600S.

 

 

 

 

randomly according to the sound level

 

 

 

 

 

 

 

 

 

 

mode and low pass mode.

SHORT PLAYBCK/SHORT MODE (short playback

!

RANDOM 2 – The flash pattern changes

mode)

 

 

 

randomly according to the sound level

You can select the length of the playback time.

 

 

 

mode.

1 Press M.C. to display the setting mode.

 

 

! RANDOM 3 – The flash pattern changes

2 Turn M.C. to select the desired setting.

 

 

 

randomly according to the low pass mode.

1.0 MIN (1.0 minute)—1.5 MIN (1.5 minutes)—

 

 

MIX PATTERN (mix pattern)

2.0 MIN (2.0 minutes)—2.5 MIN (2.5 minutes)

 

 

 

 

The MIXTRAX special effects display changes with

—3.0 MIN (3.0 minutes)—OFF (off)

 

 

FLASH AREA (flash area)

 

 

changes in the audio level.

 

 

1 Press M.C. to display the setting mode.

You can select areas for flashing colors.

 

 

2 Turn M.C. to select the desired setting.

1 Press M.C. to display the setting mode.

 

 

! SOUND LEVEL – The mix pattern changes

2 Turn M.C. to select the desired setting.

 

 

 

according to the sound level.

KEY/DISPLAY (key and display)—KEY (key)—

 

 

! LOW PASS – The mix pattern changes ac-

OFF (off)

 

 

 

cording to the bass level.

! When OFF is selected, the color set under IL-

 

 

! RANDOM – The mix pattern changes ran-

LUMI is used as the display color.

 

 

 

domly according to the sound level mode

and low pass mode.

FLASH PATTERN (flash pattern)

DISPLAY FX/DISP FX (display effect)

The MIXTRAX special effects display can be turned on or off.

1 Press M.C. to select the desired setting. ON (MIXTRAX special effects display)—OFF (normal display)

CUT IN FX (manual cut-in effect)

You can turn on or off the MIXTRAX sound effects while manually changing tracks.

1Press M.C. to select the desired setting. ON (on)—OFF (off)

Initial menu

1Press and hold SRC/OFF until the unit turns off.

2Press M.C. to display the main menu.

3Turn M.C. to change the menu option and press to select INITIAL.

4Turn M.C. to select the initial menu func- tion.

Once selected, the following initial menu func- tions can be adjusted.

!REAR-SP is not available for DEH-X6600BT, DEH-X66BT, DEH-X4600BT and DEH-X3600S.

!SP-P/O MODE is not available for DEH- X6600BS.

!S/W UPDATE is not available for DEH- X3600S.

!SXM RESET is not available for DEH- X6600BT, DEH-X66BT and DEH-X4600BT.

REAR-SP (rear output setting)

The rear speaker leads output and the RCA output of this unit can be used to connect a full-range speaker or subwoofer. Select a suitable option for your connection.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting.

!FUL – Select when there is a full-range speaker connected to the rear speaker leads output.

!SW – Select when there is a subwoofer connected directly to the rear speaker leads output without any auxiliary amp.

SP-P/O MODE (rear output and preout setting)

The rear speaker leads output and the RCA output of this unit can be used to connect a full-range speaker or subwoofer. Select a suitable option for your connection.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting.

!REAR/SUB.W – Select when there is a full- range speaker connected to the rear speak- er leads output and there is a subwoofer connected to the RCA output.

!SUB.W/SUB.W – Select when there is a subwoofer connected directly to the rear speaker leads output without any auxiliary amp and there is a subwoofer connected to the RCA output.

!REAR/REAR – Select when there is a full- range speaker connected to the rear speak- er leads output and the RCA output.

If there is a full-range speaker connected to the rear speaker leads output and the RCA output is not used, you may select either REAR/SUB.W or REAR/REAR.

S/W UPDATE (updating the software)

16En