Using this unit
Using this unit
Section
02
Setting up for
1Connection
Use the Bluetooth telephone connection menu. Refer to Connection menu operation on page 11.
2Function settings
Use the Bluetooth telephone function menu. Refer to Phone menu operation on page 12.
Basic operations
Making a phone call
1Refer to Phone menu operation on page 12.
Answering an incoming call
1When a call is received, press 
.
Ending a call
1Press 
.
Rejecting an incoming call
1When a call is received, press and hold 
.
Answering a call waiting
1When a call is received, press 
.
Switching between callers on hold
1Press M.C.
Canceling call waiting
1Press and hold 
.
Adjusting the other party’s listening volume
1Press c or d while talking on the phone.
!When private mode is on, this function is not available.
Turning private mode on or off
1Press BAND/
while talking on the phone.
Note
If private mode is selected on the cellular phone,
Storing and recalling phone numbers
1To store: Press and hold down one of the preset tuning buttons (1/
to 6/
).
The functions below can be used to store phone numbers to the memory. For details, refer to Phone menu operation on page 12.
!MISSED (missed call history)
!DIALED (dialed call history)
!RECEIVED (received call history)
!PHONE BOOK (phone book)
2To recall: Press one of the preset tuning buttons (1/
to 6/
).
3Press M.C. to make a call.
Switching the display
Selecting the desired text information You can change the display during a call.
1Press DISP to cycle between the following:
!Call time
!Name of other party
!Number of other party
Using voice recognition
This feature can be used on an iPhone equipped with voice recognition that is connected by Bluetooth.
1Press and hold M.C. to switch to voice recognition mode.
2Press M.C. and then talk into the micro- phone to input voice commands.
To end voice recognition mode, press BAND/
.
Notes
!For details on voice recognition features, check the manual for your iPhone.
!In order for your voice commands to be rec- ognized and interpreted correctly, ensure that conditions are suitable for recognition.
!Please note that wind blowing through the vehicle windows and noise coming from out- side the vehicle can interfere with voice com- mand operation.
!For optimum
!Speaking too soon after the start of the com- mand may cause voice recognition to fail.
!Speak slowly, deliberately, and clearly.
Connection menu operation
Important
Connected devices may not work properly if more than one Bluetooth device is connected at a time (e.g. a phone and a separate audio player are connected simultaneously).
1Press and hold 
to display the connec- tion menu.
# You cannot perform this step during a call.
2Turn M.C. to select the function.
Once selected, the following functions can be adjusted.
DEVICELIST (connecting or disconnecting a device from the device list)
1Press M.C. to display the setting mode.
2Turn M.C. to select the name of a device you want to connect/disconnect.
!Press and hold M.C. to swap between the Bluetooth device address and the device name.
3Press M.C. to connect/disconnect the selected
device.
If the connection is established, * is indicated
on the device name.
!When no device is selected in the device list, this function is not available.
DEL DEVICE (deleting a device from the device list)
1Press M.C. to display the setting mode.
2Turn M.C. to select the name of a device you want to delete.
!Press and hold M.C. to swap between the Bluetooth device address and the device name.
3Press M.C. to display DELETE YES.
4Press M.C. to delete the device information from the device list.
!When no device is selected in the device list, this function is not available.
!While this function is in use, do not turn off the engine.
ADD DEVICE (connecting a new device)
English
En 11