Using this unit

Section

02

Setting up for hands-free phoning

Before you can use the hands-free phoning function you must set up the unit for use with your cellular phone.

1Connection

Use the Bluetooth telephone connection menu. Refer to Connection menu operation on this page.

2Function settings

Use the Bluetooth telephone function menu. Refer to Phone menu operation on the next page.

Basic operations

Using voice recognition

This feature can be used on an iPod equipped with voice recognition that is connected by Bluetooth with the source set to iPod or

BT Audio.

%Press and hold M.C. to switch to voice recognition mode.

Notes

!For details on voice recognition features, check the manual for the iPod you are using.

!Some commands may not be available on this unit.

unit this Using

Making a phone call

!Refer to Phone menu operation on the next page.

Answering an incoming call

1When a call is received, press .

Ending a call

1Press .

Rejecting an incoming call

1When a call is received, press and hold .

Answering a call waiting

1When a call is received, press .

Switching between callers on hold

1Press M.C.

Canceling call waiting

1Press and hold .

Adjusting the other party’s listening volume

1Turn LEVER while talking on the phone.

!When private mode is on, this function is not available.

Turning private mode on or off

1Press BAND/ while talking on the phone.

Switching the information display

1Press /DISP while talking on the phone.

Notes

!If private mode is selected on the cellular phone, hands-free phoning may not be avail- able.

!The estimated call time appears in the display (this may differ slightly from the actual call time).

Connection menu operation

Important

!Be sure to park your vehicle in a safe place and apply the parking brake when performing this operation.

!Connected devices may not work properly if more than one Bluetooth device is connected at a time (e.g. a phone and a separate audio player are connected simultaneously).

1Press and hold to display the con- nection menu.

# You cannot perform this step during a call.

2Turn M.C. to select the function.

Once selected, the following functions can be adjusted.

Device list (connecting or disconnecting a device from the device list)

!When no device is selected in the device list, this function is not available.

1Press M.C. to display the setting mode.

2Turn M.C. to select the name of a device you want to connect/disconnect.

!Press and hold M.C. to swap between the Bluetooth device address and the device name.

3Press M.C. to connect/disconnect the selected de- vice.

Once the connection is established, Connected is displayed.

En 19