Using this unit

Section

02

You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are stored in Custom1 or Custom2.

!Custom1 can be set separately for each source. However, each of the below combinations are set to the same setting automatically.

!USB, iPod, SD, and Apps (iPhone)

!BT Audio, and Apps (Android)

!Custom2 is a shared setting used in common for all sources.

1Press M.C. to display the setting mode.

2Press M.C. to cycle between the following: Equalizer band—Equalizer level

3Turn M.C. to select the desired setting. Equalizer band: 100Hz—315Hz—1.25kHz— 3.15kHz—8kHz

Equalizer level: +6 to –6

Loudness (loudness)

Loudness compensates for deficiencies in the low-frequency and high-frequency ranges at low volume.

1Press M.C. to display the setting mode.

2Press M.C. to turn loudness on or off.

3Turn M.C. to select the desired setting. Low (low)—Mid (mid)—High (high)

Subwoofer1 (subwoofer on/off setting)

This unit is equipped with a subwoofer output which can be turned on or off.

1Press M.C. to display the setting mode.

2Press M.C. to turn subwoofer output on or off.

3Turn M.C. to select the phase for the subwoofer output.

Turn M.C. to the left to select reverse phase, and Reverse appears in the display. Turn M.C. to the right to select normal phase, and Normal appears in the display.

Subwoofer2 (subwoofer adjustment)

Only frequencies lower than those in the selected range are outputted from the subwoofer.

1Press M.C. to display the setting mode.

2Press M.C. to cycle between the cut-off frequency and the output level for the subwoofer.

3Turn M.C. to select the cut-off frequency. 50Hz—63Hz—80Hz—100Hz—125Hz

4Turn M.C. to adjust the output level for the sub- woofer.

+6 to –24 is displayed as the level is increased or decreased.

Bass Booster (bass boost)

1Press M.C. to display the setting mode.

2Turn M.C. to select a desired level.

0 to +6 is displayed as the level is increased or de- creased.

HPF (high pass filter adjustment)

When you do not want low sounds from the subwoo- fer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers.

1Press M.C. to display the setting mode.

2Press M.C. to turn high pass filter on or off.

3Turn M.C. to select the cut-off frequency. 50Hz—63Hz—80Hz—100Hz—125Hz

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the volume level of each source to prevent sudden changes in volume when switching between sources.

!Settings are based on the FM volume level, which remains unchanged.

!The MW/LW volume level can also be adjusted with this function.

!Each of the below combinations are set to the same setting automatically.

!USB, iPod, SD, and Apps (iPhone)

!BT Audio, and Apps (Android)

1Press M.C. to display the setting mode.

2Turn M.C. to adjust the source volume. Adjustment range: +4 to –4

Using different entertainment displays

You can enjoy entertainment displays while listening to each sound source.

1Press M.C. to display the main menu.

2Turn M.C. to change the menu option and press to select ENTERTAINMENT.

unit this Using

En 25