CONNECTIONS
Always turn off the power switch and disconnect the power plug from its outlet when making or changing connections.
CONNECTING INPUTS
The front panel PHONES jack can be used to connect headphones
with a Ø6.3 mm stereo phone plug.
Connect a DJ CD player’s audio output connectors to one of the channel 1 to 2 CD input connectors, and connect the player’s control cable to the corresponding channel’s CONTROL connector.
Set the connected channel’s input selector switch to [CD].
Analog turntable
| STEREO/MONO switch | Front panel | ||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To connect an analog turntable, connect the turntable’s audio output cable to one of the channel 1 to 2 PHONO/LINE input connectors. Set
POWER
MONO STEREO
the corresponding channel’s PHONO/LINE switch to [PHONO], and set the channel’s input selector switch to [PHONO/LINE]. The DJM- 400’s PHONO inputs support MM cartridges. Connect the turntable’s ground wire to the
To use a cassette deck or other CD player, connect the component’s audio output connectors to one of the channel 1 to 2 PHONO/LINE input connectors. Then set the corresponding channel’s PHONO/ LINE switch to [LINE], and the input selector switch to [PHONO/LINE].
MicrophoneThe MIC1 and MIC2 jacks can be used to connect microphones with Ø6.3 mm phone plugs. Set MIC/AUX switch to [MIC] position.
Auxiliary input connectorsThe MIC1 and MIC2 jacks can also be used together as a pair of stereo line input connectors to connect a component equipped with line level output connectors. Connect the component’s L channel to MIC1 (AUX(L)) jack and the R channel to the MIC2 (AUX(R)) jack. Then set the MIC/AUX switch to [AUX] (this connection requires the use of Ø6.3 mm phone plugs).
CONNECTING OUTPUTS
Master outputThis unit is furnished with MASTER OUT 1 and MASTER OUT 2 output systems, both of which support the use of RCA plugs.
If the unit’s STEREO/MONO switch is set to [MONO], the master output will be a monaural combination of L+R channels.
OFF | ON |
|
AC IN | 1 | 2 |
MASTER
OUT L
R
L 
R 
R 
L
Power amplifier
Cassette deck, etc. | Power amplfier | Headphones |
(analog input recording |
|
|
component) |
|
|
CONNECTING THE POWER CORD
Connect the power cord last.
÷After completing all other connections, connect the accessory power cord to the AC inlet on the back of the player, then connect the plug to a standard wall outlet or to the auxiliary power outlet of your amplifier.
÷Use only the supplied power cord.
MIC/AUX switch
|
|
|
|
|
|
|
|
| Input selector switches | |
|
|
|
|
|
|
|
|
| Microphone 2 | |
|
| MONO | STEREO | MIC2 |
| MIC1 |
|
| ||
POWER |
| AUX(R) |
| AUX(L) |
|
| Microphone 1 | |||
|
|
| MIC |
| AUX |
|
| |||
OFF ON |
|
|
|
|
|
| ||||
AC IN |
|
|
| PHONO | CD |
| PHONO | CD |
| |
1 |
| 2 | LINE |
| LINE |
| ||||
|
|
|
|
|
|
| ||||
MASTER |
|
|
|
|
|
|
| SIGNAL |
| |
OUT | L |
|
| L |
|
| L | GND |
| |
|
|
|
|
|
| |||||
|
|
|
| LINE PHONO |
|
| LINE PHONO |
| R | |
| R |
|
| R |
|
| R |
| ||
|
|
|
|
|
|
| ||||
|
|
|
|
|
| CONTROL |
| CONTROL |
| |
|
|
|
|
|
|
|
|
| L | |
|
|
|
|
|
|
|
|
| Electronic instrument, | |
PHONO/LINE switch | L | R | R L | R | L | R L | R L | CD player, etc. (phone | ||
plug connection) | ||||||||||
Note: |
| |||||||||
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| ||
Set switch to [LINE] |
|
|
|
|
|
|
|
|
| |
except when using |
|
|
|
|
|
|
|
|
| |
an analog turntable |
|
|
|
|
|
|
|
|
| |
Cassette deck, etc. | Analog turntable | Analog turntable | DJ CD player | DJ CD player |
5