Pioneer DJM-700-K, DJM-700-S 15

MIXER OPERATIONS

[Using the Cross Fader to Start Playback]

FADER START 1 1, 2

CROSS

FADER 2

ASSIGN

A / THRU / B

1Press the FADER START button for the channel (1, 2) connected to the CD player you wish to control.

•The button for the selected channel lights.

2Set the CROSS FADER ASSIGN switch for the selected channel to [A] or [B].

•Select [A] to assign to cross fader channel A (left side).

•Select [B] to assign to cross fader channel B (right side).

3Move the cross fader lever to the full opposite side away from the CD player you wish to start.

4Set the CD player to the desired cue point, and engage cue point standby.

•If a cue point has already been set, it is not necessary to set the CD player to standby at the cue point.

5At the instant you wish to start playback, move the cross fader lever.

•CD player begins playback.

•After playback has begun, if the cross fader lever is moved fully to the opposite side, the CD player assigned to the opposite side channel will return to the cue point and enter standby mode (back cue).