Pioneer DV-393-S manual Getting started, Setting up the player for your

Getting started

Note

•From here on in this manual, the word ‘select’ generally means use the cursor buttons to highlight an item on-screen, then press ENTER.

Setting up the player for your

TV

If you have a widescreen (16:9) TV, you should setup the player so that the picture will be presented correctly. If you have a conventional (4:3) TV, you can leave the player on the default setting and move on to the next section.

1Press HOME MENU and select ‘Initial Settings’.

Initial Settings

04

Setting the language of this player’s on-screen displays

This sets the language of the player’s on- screen displays.

1Press HOME MENU and select ‘Initial Settings’.

Initial Settings

2Select ‘OSD Language’ from the ‘Display’ settings.

Initial Settings
Digital Audio Out	OSD Language	English
Video Output	Angle Indicator	français
Language		Deutsch
Display		Italiano
Options		Español

2Select ‘TV Screen’ from the ‘Video Output’ settings.

Initial Settings
Digital Audio Out	TV Screen	4:3 (Letter Box)
Video Output	Component Out	4:3 (Pan&Scan)
Language	AV Connector Out	16:9 (Wide)
Display
Options

3If you have a widescreen (16:9) TV, select ‘16:9 (Wide)’.

If you have a conventional (4:3) TV, you can change the setting from 4:3 (Letter Box) to 4:3 (Pan & Scan) if you prefer. See Video Output settings on page 35 for more details.

4Press HOME MENU to exit the menu screen.

3 Select a language.

The on-screen language will change according to your selection.

4Press HOME MENU to exit the menu screen.

19

En