Connecting to an AV receiver
You can connect this player to your AV receiver using the multichannel analog outputs or one of the digital outputs.
In addition to these connections, you should also connect the 2 channel analog outputs for compatibility with all discs.
You’ll probably also want to connect a video output to your AV receiver. You can use any of the video outputs available on this player (the illustration shows a standard (composite) connection).
1Connect the analog AUDIO OUT (5.1ch) FRONT L/R and VIDEO OUT jacks on this player to a set of analog audio and video inputs on your AV receiver.
To audio/video inputs
AV receiver
VIDEO OUT | SL | C | L |
PB |
|
|
|
| PR | Y |
| SR | SW | R |
HDMI OUT | COMPONENT VIDEO OUT |
| AUDIO OUT (5.1ch) |
| ||
2Connect the AV receiver’s video output to a video input on your TV.
You can also use the SCART AV connector, the
Tip
•You usually have to connect the same kind of video cable between your DVD player and AV receiver, and between your AV receiver and TV.
Connecting the multichannel | 02 | |
analog outputs | ||
|
If your AV receiver has 5.1 channel analog inputs, we recommend connecting this player to it using the multichannel analog outputs. Doing this will ensure that you can enjoy all kinds of disc, including Dolby Digital and DTS
•Connect the
It’s convenient to use three stereo audio cables; one for the FRONT, one for the SURROUND and one for the CENTER and SUBWOOFER channels.
To
AV receiver
VIDEO OUT | SL | C | L |
PB |
|
|
|
| PR | Y |
| SR | SW | R |
HDMI OUT | COMPONENT VIDEO OUT |
| AUDIO OUT (5.1ch) |
| ||
You can also use the SCART AV connector, the
Tip
•After connecting up and switching on, you should change the Audio Output Mode setting in the Initial Setup menu from the default 2 Channel to 5.1 Channel. See also Audio Output Mode on page 44.
13
En
