Pioneer DV-626D Analog Audio Connection:

Analog Audio Connection:

After making physical connections to either the AUDIO

OUT (2 Ch) or AUDIO OUT (5.1 Ch) analog jacks, be sure

to identify which output you are going to be using in the

[Analog Jacks] screen of the Setup Navigator (page 23).

You can also manually set the output in the [Audio Out]

setting of the Setup screen Audio 2 menu (page 33).

Notes

•When “5.1 Channel” is selected, the front right (R) and left (L)

audio channels are output from the 2 channel jacks.

•The [Audio Out] setting creates an audio output default for the

player. If connections are made to both AUDIO OUT (2 Ch) and

AUDIO OUT (5.1 Ch) analog jacks to make different audio

connections for multichannel and stereo audio sources, it is

possible to switch between 2 channel and 5.1 channel audio

output by pressing 5.1 CH MODE on the front panel. However,

this button does not work when the GUI indicator is lit.

2 CHANNEL AUDIO OUT

• Make analog audio connections to a stereo amplifier

or receiver.

• Analog audio connections can also be made to a TV or

monitor with stereo input jacks.

• Use the supplied audio cable to connect one of the

AUDIO OUT jacks on the player to the audio input on

the stereo amplifier or receiver.

• When making analog audio connections, be sure to

match the color of the plugs with the color of the

jacks (red and white).

• When making this kind of connection, be sure to

select “2 Channel” in the Setup Navigator [Analog

Jacks] screen (page 23).

5.1 CHANNEL AUDIO OUT

5.1 channel audio refers to the current industry surround

sound standard requiring two front speakers, a center

speaker, two surround (rear) speakers and a sub woofer.

Although in actuality there are 6 channels, because the

sub woofer channel, or LFE channel, makes up a mere

fraction of the total audio soundtrack, it has been

designated as the 0.1 of the 5.1 system.

By utilizing the player’s internal multichannel audio

decoder, the audio of Dolby Digital and DTS DVDs can

be output from the 5.1 channel discrete outputs to an AV

amplifier or receiver with 5.1 channel input capability.

• Use audio cables to make connections from the

player’s AUDIO OUT (5.1 ch) jacks to the equivalent

input jacks on the AV amplifier or receiver. This type

of amplifier or receiver may be referred to as

“multichannel ready” or “Dolby Digital ready”.

• When making 5.1 channel analog audio connections,

be sure to match the left and right channels on both

components, and also make sure that the jacks of all

the channels are connected correctly on both

components.

• Either 2 single audio cords or a stereo cord may be

used to connect the CENTER and SUB WOOFER

channels to the AV amplifier or receiver.

• When making this kind of connection, be sure to

select “5.1 Channel” in the Setup Navigator [Analog

Jacks] screen (page 23).

AUDIO OUT (5.1 ch)

FRONT

SURROUND

SUB

WOOFER

CENTER

5.1 CH INPUT

FRONT

SURROUND

SUB

WOOFER

CENTER

AV amplifier or receiver

AUDIO IN

AUDIO OUT (2 ch)

Stereo amplifier or receiver