INTERFACE
REAR VIEW
MASTER
SLAVE
CABLE SELECT 
|
|
|
| C S M | |
A | NLOG AUD | IO | |||
S L A | |||||
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
| |
|
|
| DC INPUT | |
39 | IDE INTERFACE | 1 | 5V G G 12V | |
40 | 2 | |||
|
|
6 | 7 | 8 | 9 |
6Audio Output
This is a connector for output of analog audio.
This connector is compatible with `Molex 70553`, choose a suitable connection cable.
Pin | Name | Function |
1 | L | Left channel audio output. |
2 | G | Ground. |
3 | G | Ground. |
4 | R | Right channel audio output. |
7Device Configuration Jumper
Switch becomes ON when short socket is put.
Make sure the power of the drive is off before changing jumper setting. Pin # 1 is ON at the time of shipping from the plant.
Pin | Name |
| Function |
|
|
|
|
1 | MA | on | The drive is used in master mode. |
2 | SL | on | The drive is used in slave mode. |
|
|
|
|
3 | CS | on | Using Cable Select function. |
4 |
| Reserved. | |
|
|
|
|
5 |
| Reserved. | |
8Host IDE Interface
This is a 40 pin I/O connector according to the ATA specifications.
9DC Input
Pin | Name | Function |
1 | +12 | Power supply input for DC +12 V. |
2 | G | Ground. |
3 | G | Ground. |
4 | +5 | Power supply input for DC +5 V. |
8
En
