Section

 

 

 

 

 

 

 

 

 

 

 

01

 

Operating this unit

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu operations identical

 

Removing the front panel to protect your unit from

 

theft

 

for function settings/audio

 

1 Press the detach button to release the front

 

 

 

panel.

 

adjustments/initial

 

2 Grab the front panel and remove.

 

settings/lists

 

 

! Always keep the detached front panel in a

 

 

 

protection device such as a protection case.

 

 

 

 

 

Re-attaching the front panel

 

Returning to the previous display

 

 

Returning to the previous list (the folder one level

 

1 Slide the front panel to the left until it clicks.

 

 

 

Front panel and the head unit are connected on

 

higher)

 

 

the left side. Make sure that the front panel has

 

1 Press DISP/ /SCRL.

 

 

been properly connected to the head unit.

 

Returning to the main menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Returning to the top tier of list

 

 

 

 

 

 

 

 

 

1 Press and hold DISP/ /SCRL.

 

 

 

 

 

 

 

 

 

Returning to the ordinary display

 

 

 

 

 

 

 

 

 

Canceling the initial setting menu

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Press BAND/ESC.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Returning to the ordinary display from the list

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Press BAND/ESC or .

 

2 Press the right side of the front panel until it is

 

 

 

 

 

 

 

 

 

 

 

firmly seated.

 

 

 

 

 

 

If you can’t attach the front panel to the head unit

 

 

 

 

 

 

successfully, try again. However, forcing the front

 

Tuner

 

 

panel into place may result in damage.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Turning the unit on

 

Basic Operations

 

1 Press SRC/OFF to turn the unit on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Turning the unit off

 

 

 

 

 

 

Selecting a band

 

1 Press SRC/OFF and hold until the unit turns off.

 

 

 

1 Press BAND/ESC until the desired band (F1, F2,

 

 

 

 

 

 

 

 

 

 

Selecting a source

 

F3 for FM or AM) is displayed.

 

 

 

 

 

 

1 Press SRC/OFF to cycle between:

 

Manual tuning (step by step)

 

 

TUNER (tuner)—CD (built-in CD player)—USB

 

 

 

 

1 Press c or d.

 

 

(USB)—AUX (AUX)

 

 

 

 

 

 

 

 

 

Seeking

 

 

 

 

 

 

 

 

 

 

Adjusting the volume

 

 

1 Press and hold c or d, and then release.

 

1 Turn M.C. to adjust volume.

 

 

 

You can cancel seek tuning by briefly pressing c

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or d.

 

 

Note

 

While pressing and holding c or d, you can skip

 

 

 

stations. Seek tuning starts as soon as you re-

 

 

 

 

 

 

 

 

 

 

When this unit’s blue/white lead is connected to

 

lease c or d.

 

 

 

 

 

 

the vehicle’s auto-antenna relay control terminal,

 

 

 

 

 

the vehicle’s antenna extends when this unit’s

 

Storing and recalling stations

 

source is turned on. To retract the antenna, turn

 

 

the source off.

 

for each band

You can easily store up to six stations for each band as presets.

% When you find a station that you want to store in memory, press one of the preset tuning buttons (1 to 6) and hold until the preset number stops flashing.

Stored radio station frequency can be recalled by pressing the preset tuning button.

6 En