See Heading 7 for the name display on/off function.
6. Storing Priority (PR) Channel
It is very useful, particularly in mobiles, to have a single button available to retrieve the Priority Channel. The Priority Channel frequency may be programmed as follows:
| Display: |
- Select VCO mode | (43*.***.*** ) |
- Enter the desired frequency and set | |
SHIFT and/or CTCSS if required | |
- Press H. | ( Select Function ) |
- Press F. | ( Calling Frequency? ) |
-Press H.
-If desired, give the channel a name
| ( Name: | ) |
See Heading 10 for text entry. |
| |
- Press H again. | ( Processing | ) |
See Heading 7 for the name display on/off function.
7.Name display on/off
Names may be assigned to memory channels. The displaying of the name may be switched on and off, as follows:
Display:
- Press H(Select Function ) - Press 6
8. Clear memory channel
| Display: |
|
- Select Memory mode | (** ****** | ) |
- Select the channel to be cleared |
| |
- Press H | ( Select Function ) | |
- Press S | ( Clear Channel? ) | |
- Press H | ( Processing ) | |
9. Clear Priority (PR) Channel
| Display: |
|
- Select Prioruty Channel (button F) |
| |
| (A ****** | ) |
- Press H | (Select Function ) | |
- Press F | (Clear Calling?) | |
- Press H | ( Processing | ) |
10. Text entry
Text entry using the keys on the keypad is largely similar to the method used on GSM phones. For example, the letters A, B and C are 'behind' the
number key '2'. The desired letter or character is selected by repeatedly pressing a number key.
The B button is used to delete a character. Text beyond the cursor position will shift back, just as with the DEL key when using a word processor.
The E button is used to enter a space.
All characters behind the keys on the keypad are shown in the table below. The up and down arrow keys C and D may be used to step through a character group. The cursor may be moved by pressing the left and right arrow keys F and G.
On completion of text entry, press the H key.
11. Scanning
De transceiver is capable of scanning in Memory as well as in VFO mode:
To scan all frequencies:
-Switch to VFO mode by pressing the G button
-Press the * button
To scan memory channels:
-Select MEMory mode by pressing the G button
-Press the * button
Press any key to stop scanning. During scanning the red LED is illuminated.
If the transceiver has halted on a certain channel, scanning may be resumed by pressing * again.
During scanning indicator F is displayed.
12. Exclude channels from
scanning
It is possible to skip certain memory channels while scanning.
|
| Display: |
- Select MEMory mode | (** 43*** ) | |
- Select the relevant channel | ||
- Press | H | (Select Function ) |
- Press | * |
|
Indicator E shows that the channel is skipped during scanning.
- 4 -
