Pioneer GEX-P10XMT XM tuner Additional Information, Display the ID code Radio ID, Messages

XM tuner

Additional Information

Additional Information

Selecting the channel in the channel category

Channels are organized into various program categories, e.g. Rock, Classic, Jazz. You can search between different categories, and then search among channels within each channel category.

1Select the channel category select mode. (Refer to “Switching the channel select mode” above.)

2Press BAND to return to the previous display.

3 Press or to select the desired channel category.

Once you select a channel category, the unit searches for channels in that category. During search, the channel category doesn’t immediately change even if you press the button. To successively change the channel category, continue pressing the button.

4 Press or to select the desired channel in the selected channel category.

The channel number moves up or down in the selected channel category.

Channels that cannot currently be selected are skipped, and the next channel in that channel category is selected.

Note

If you select a channel of another category by channel recall, etc., during steps 3 and 4, the category selected in step 3 still remains in memory. If you press or , the channel num- ber moves up or down in the category selected in step 3 regardless of the category of the pre- sent channel.

Display the ID code (Radio ID)

Each XM tuner is identified with a unique Radio ID. You will need the Radio ID when activating XM service or when reporting a problem. How to display the ID code depends on the channel select mode.

Note

Carefully check your XM Radio ID. The letters F, I, O, and S are not used.

Channel number select mode

If you select CH 000, the ID code is displayed.

Press or to select the channel number zero (CH 000).

Channel category select mode

RADIO ID is provided as a channel category for displaying the ID code.

Press or to select the RADIO ID from channel category.

Notes

•If you select another channel, display of the ID code is canceled.

•Display of the ID code repeats displaying RADIO ID and the ID code one after the other.

Messages

When problems occur with the XM tuner, a message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action.

Message	Cause	Action
ANTENNA	The XM antenna is not	Check whether the XM antenna cable is
	connected.	attached securely.
	A short-circuit occurring in	Make sure that there is nothing unusual
	the antenna or the surrounding	with the antenna or antenna cable. Turn the
	antenna cable.	ignition off and then on.
UPDATING	Radio is being updated with	Wait until the encryption code is fully
	latest encryption code.	updated. Channels 000 and 001 should
		function normally.
NOSIGNAL	XM signal is too weak at the	Wait until the car reaches a location
	current location.	with a stronger signal.
LOADING	Unit is acquiring audio or	Wait until the unit has received the
	program information.	information.
OFF AIR	The channel currently selected	Select another channel.
	has stopped broadcasting.
– – – – – – – –	The user has selected a channel	Automatically switches to Channel 001.
	number that does not exist or is
	not subscribed to.
– – – –	There is no artist name/feature,	No action needed.
	song/program title, or channel
	category associated with the
	channel at that time.

Note

When the messages that is not listed above are displayed, refer to the operation manual supplied with the head unit.

Specifications

General

Power source	14.4 V DC (10.8 – 15.1 V
	allowable)
Grounding system	Negative type
Max. current consumption
.............................................	2.0 A
Dimensions (W ⋅ H ⋅ D)	179 ⋅ 27 ⋅ 139 mm
	(7 ⋅ 1 ⋅ 5-1/2 in.)
Weight	0.57 kg (1.26 lbs)

XM tuner

Frequency range	2,332.50 – 2,345.00 MHz
Usable sensitivity
Satellite	– 105.0 dBm
Terrestrial	– 102.0 dBm

Audio

Signal-to-noise ratio	90 dB (IHF-A network)
Separation	85 dB

Antenna

Power source (Provided by the satellite line)

.............................................	4.9 V DC
	(4.4 – 5.4 V allowable)
Max. current consumption
.............................................	0.1 A
Type	Active type
Dimensions
Base (W ⋅ H ⋅ D)	29 ⋅ 14 ⋅ 40 mm
	[1-1/8 ⋅ 1/2 ⋅ 1-5/8 in]
Cord	5 m
Weight	0.06 kg (0.13 lbs)

Note

Due to possible improvements, specifications and design are subject to change without notice.

En En En