Black plate (25,1)
<CRD3740-A>25
1 PressAUDIO to select F-HPF or R-HPF.
PressAUDIO until F-HPF or R-HPF appears in
thedisplay.
2 Pressato turn high pass filter on.
F-HPF:80 or R-HPF: 80 appears in the display.
Highpass filter is now on.
#Toturn high pass filter off, press b.
3 Presscor dto select cut-off frequency.
Eachpress of cor dselects cut-off frequen-
ciesin the following order:
506380100125(Hz)
Onlyfrequencies higher than those in the se-
lectedrange are output from the front or rear
speakers.

Adjusting high pass filter

attenuation slope

Whenthe high pass filter is on, you can adjust
thecontinuity of sound between speaker
units.
1 PressAUDIO to select the slope setting.
PressAUDIO until F-SLP or R-SLP appears in
thedisplay.
2 Presscor dto select slope.
Presscand 12 is displayed. Press dand 6is
displayed.
Using non fading output
Whenthe non fading output settingis on, the
audiosignal does not pass through this units
lowpass filter (for the subwoofer), but is out-
putthrough the RCA output. For more details,
seeSwitching the RCA output setting onpage
32.
1 PressAUDIO to select NoFAD.
Whenthe RCA output setting is P/O :FUL, you
canselect NoFAD. Press AUDIO until NoFAD
appearsin the display.
2 Pressato turn non fading output on.
NoFAD:ONappears in the display. Non fading
outputis now on.
#Toturn non fading output off, press b.

Adjusting non fading output level

Whenthe non fading output ison, you can ad-
justthe level of non fading output.
1 PressAUDIO to select non fading out-
putsetting.
PressAUDIO until NoFAD: 0 appears in the
display.
2 Pressaor bto adjust the level of the
nonfading output.
Eachpress of aor bincreases or decreases
thelevel of the non fading output (e.g., +6
24).
Pressaor buntil you see the desired value
displayed.
Audio Adjustments
En 25
English
Section
07
HHHHHHHHHHHHHH