Operating this unit

Audio Adjustments

You can adjust the currently selected equalizer curve

1 Display the audio menu.

setting as desired. Adjusted equalizer curve settings

are stored in Custom1 or Custom2.

Refer to Basic menu operations on page 12.

!

A separate Custom1 curve can be created for

2 Turn M.C. to select the audio function.

 

each source. If you make adjustments when a

 

curve other than Custom2 is selected, the equali-

After selecting, perform the following proce-

!

zer curve settings will be stored in Custom1.

dures to set the audio function.

A Custom2 curve that is common for all sources

 

 

can be created. If you make adjustments when

Fader/Balance (fader/balance adjustment)

 

the Custom2 curve is selected, the Custom2

 

curve will be updated.

 

 

1 Press M.C. to display the setting mode.

1

Press M.C. to display the setting mode.

2 Push M.C. up or down to adjust the front/rear

2

Turn M.C. to select an equalizer curve.

speaker balance.

 

Powerful—Natural—Vocal—Custom1—Cus-

Adjustment range (front/rear): Front 15 to Rear

 

tom2—Flat—Super Bass

15

 

! When Flat is selected no adjustments are

3 Push M.C. left or right to adjust the left/right

 

made to the sound.

speaker balance.

3

Push M.C. left or right to select the equalizer

Adjustment range (left/right): Left 15 to Right 15

 

band to adjust.

! Select F/R 0 when only using two speakers.

 

40Hz—80Hz—200Hz—400Hz—1kHz—2.5kHz

! When the rear output setting and preout setting

 

—8kHz—10kHz

are Subwoofer, you cannot adjust front/rear

4

Push M.C. up or down to adjust the level of the

speaker balance.

 

equalizer band.

 

 

Adjustment range: +12dB to –12dB

Sonic Center Control (sonic center control)

 

Loudness (loudness)

Sound that is suited for the listening position can ea-

Loudness compensates for deficiencies in the low-

sily be created with this function.

1 Press M.C. to display the setting mode.

and high-frequency ranges at low volume.

2 Push M.C. left or right to select a listening posi-

1

Press M.C. to display the setting mode.

tion.

2

Turn M.C. to select the desired setting.

Adjustment range: Left:7 to Right:7

 

Off (off)—Low (low)—Mid (mid)—High (high)

 

3

Press M.C. to confirm the selection.

Auto EQ (auto-equalizer on/off)

Subwoofer1 (subwoofer on/off setting)

The auto-equalizer is an equalizer curve created by

This unit is equipped with a subwoofer output which

auto EQ (refer to Auto EQ (auto-equalizing) on page

33).

can be turned on or off.

You can turn the auto-equalizer on or off.

1

Press M.C. to turn subwoofer output on or off.

1 Press M.C. to turn the auto-equalizer on or off.

Subwoofer2 (subwoofer adjustment)

You cannot use this function if auto EQ has not been

 

 

carried out.

The cut-off frequency and output level can be ad-

Graphic EQ (equalizer adjustment)

justed when the subwoofer output is on.

Only frequencies lower than those in the selected

 

range are outputted from the subwoofer.

 

1

Press M.C. to display the setting mode.

 

2

Turn M.C. to select the phase of subwoofer out-

 

 

put.

 

 

Normal (normal phase)—Reverse (reverse

 

 

phase)

 

3

Push M.C. up or down to adjust the output level

 

 

of the subwoofer.

 

 

Adjustment range: +6 to -24

 

4

Push M.C. left or right to select the cut-off fre-

 

 

quency.

 

 

50Hz—63Hz—80Hz—100Hz—125Hz

En

Section

03

English

29