Section

 

 

 

 

 

03

 

Operating this unit

 

 

 

 

 

Notes

Initial Settings

 

! If SPEANA (spectrum analyzer) is selected,

1 Press SRC/OFF and hold until the unit

 

 

the spectrum analyzer will be displayed in-

turns off.

 

 

stead of Source image display or Artwork dis-

2 Press M.C. to display the initial setting

 

 

play.

 

 

menu.

 

! If you select USB, SD as the source, you can-

 

 

 

 

 

 

not select Slide Show.

3 Turn M.C. to select the initial setting.

 

 

 

 

 

 

After selecting, perform the following proce-

 

Customizing the illumination color

dures to set the initial setting.

 

1 Use M.C. to select Color Setting in the

 

 

 

 

A-EQ Measurement (auto-equalizing)

 

Appearance (Illumination color).

The auto-equalizer is an equalizer curve created by

 

Refer to Appearance (screen/illumination

 

auto EQ (refer to Auto EQ (auto-equalizing) on the next

 

color) on the previous page.

page).

 

 

 

You can turn the auto-equalizer on or off.

2 Use M.C. to customize the color.

Turn for fine tuning. Push left or right to adjust the next color.

3Press M.C. to store the customized color in the memory.

The illumination color will be switched to the customized color.

Rear Speaker (rear output and subwoofer setting)

This unit’s rear output (rear speaker leads output and RCA rear output) can be used for full-range speaker (Full) or subwoofer (Subwoofer) connection. If you switch the rear output setting to Subwoofer, you can connect a rear speaker lead directly to a subwoofer without using an auxiliary amp.

Initially, the unit is set for rear full-range speaker connection (Full).

1Press M.C. to display the setting mode.

2Turn M.C. to change the setting.

Subwoofer (subwoofer)—Full (full-range speak- er)

!Even if you change this setting, there is no output unless you turn the subwoofer output on (refer to Subwoofer1 (subwoofer on/off setting) on page 29).

!If you change this setting, subwoofer output in the audio menu will return to the factory settings.

3Press M.C. to confirm the selection.

Demonstration (demo display setting)

1Press M.C. to turn the demo display on or off.

BT Memory Clear (resetting the Bluetooth wireless technology module)

32 En