Section

03 Operating this unit

Bass Booster (bass boost)

System settings

1

Press M.C. to display the setting mode.

1

Display the system menu.

Refer to Basic menu operations on page 12.

2

Turn M.C. to adjust the level.

 

Adjustment range: 0 to +6

2

Turn M.C. to select the system function.

3

Press M.C. to confirm the selection.

High Pass Filter (high pass filter adjustment)

After selecting, perform the following procedures to set the system function.

When you do not want low sounds from the subwoo- fer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers.

1Press M.C. to display the setting mode.

2Turn M.C. to select the cut-off frequency.

Off (off)—50Hz—63Hz—80Hz—100Hz—125Hz

3Press M.C. to confirm the selection.

SLA (source level adjustment)

SLA (Source Level Adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources.

!When selecting FM as the source, you cannot switch to SLA.

!Settings are based on the FM volume level, which remains unchanged.

Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust.

!The AM volume level can also be adjusted with this function.

1Press M.C. to display the setting mode.

2Push M.C. up or down to adjust the source vo- lume.

Adjustment range: +4 to –4

Notes

!You cannot select Custom1 and Custom2 when using the auto-equalizer.

!Operation is complete even if the menu is can- celled before being confirmed.

Guide Info (guide information)

1Press M.C. to display the guide information. Refer to About guide information on page 13.

Clock ADJ (date and clock)

1Press M.C. to display the setting mode.

2Press M.C. to select the segment of the clock dis- play you wish to set. Day—Month—Year—Hour—Minute—AM/PM

3Turn M.C. to set the date and time.

Picture ADJ (picture adjustment)

1Press M.C. to display the setting mode.

2Turn M.C. to select the function to be adjusted. Press to select. Brightness—Contrast—Color—Hue—Dimmer

—Temperature—Black Level

For details about the settings, refer to Changing the picture adjustment on page 39.

When you select Black Level, press M.C. to turn the setting on or off.

3Turn M.C. to increase or decrease the level of the selected item.

Adjustment range: +24 to -24

!Dimmer can be adjusted from +48 to +1.

!Temperature can be adjusted from +3 to –3.

Caution Lang. (caution language settings)

You can switch the display language for the warning message of the parking brake interlock.

1Press M.C. to display the setting mode.

2Turn M.C. to select the desired setting. English—Français—Español

3Press M.C. to confirm the selection.

System Lang. (menu language settings)

30 En