Pioneer Comprehensive Manual for Custom Playback and Operations on CD Players

VARIOUS OPERATIONS

÷You can operate PD-F507 by remote control unit and also by the main unit.

÷You can operate PD-F407 by the main unit.

÷The parenthesis ( ) show operations for the main unit.

DISC (–, +)

CLEAR

MODE

3

To program and play only the discs you want to hear (CUSTOM playback)

This unit lets you program up to 25 of your favorite discs. For example, you can store all the discs of your favorite artist, or some other group of personal selections, and play only those discs.

You can even add other discs to the custom later on.

Operation example) Storing discs 3 and 12 in the CUSTOM ΙΙ file.

During stop mode, press

MODEsothattheCUSTOM

ΙΙindicator lights.

( )

÷If some disc number appears, press CLEAR.

MODE CLEAR

Digit buttons

DISC SET

DISC (–, +)

3

		3	Press MODE to select
	\		CUSTOM and press 3.
			Playback starts from the lowest disc
			No.
(	=	3	)

Checking the numbers of the stored discs.

Press TIME repeatedly (3 times) during stop mode so that the display changes as shown below.

Press DISC (–/+). Each time you press DISC (–/+), a disc number stored in the CUSTOM file is displayed. When all the disc numbers have been displayed, the disc number changes to a blank.

3

Use the digit buttons to

select disc.

CUSTOM

( )

÷If you use DISC (–, +) to select a disc, it will be programmed automatically after approximately 2 seconds.

		Press DISC SET.
		CUSTOM
		Repeat steps 2 and 3 to
1	2	store other discs.

\

()

10VARIOUS OPERATIONS

En

Erasing all the discs from the each CUSTOM file.

Press MODE to choose CUSTOM, then press the CLEAR button.

Note!!

You cannot change the discs stored in the CUSTOM file. Likewise, you cannot erase just one disc from the CUSTOM file.

¶Pressing DISC (–, +) during CUSTOM playback lets you choose among other discs stored in the CUSTOM file.

¶If you use the digit buttons and DISC SET on the remote control during CUSTOM playback to choose a disc not stored in the CUSTOM file, “**- no dISC” will be displayed for approximately 3 seconds.

¶The discs stored in the CUSTOM file will not be erased when you turn off the power.

¶When a disc appointed to the CUSTOM file is not loaded in the rack, “**- no dISC” is displayed for approximately 3 seconds, the disc is erased from memory, and CUSTOM searches for the next disc.