Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

CAUTION

This symbol refers to a hazard or unsafe practice which can result in personal injury or property damage.

Installation

Consult your dealer if you encounter any difficulties with this installation.

Pioneer is not liable for any damage resulting from im- proper installation, improper use, modification, or natural disasters.

Cautions

1.This table top stand was exclusively designed for plasma displays produced by PIONEER.

2.Do not use this stand for a plasma display or any other purpose that is not specified. The stand should not be modified and should only be used for plasma displays.

3.Improper installation may result in the stand falling over and cause serious injury. Be sure to have the plasma dis- play lying flat when attaching the stand to the main dis- play.

4.Installation Location

(a)Make sure to install the stand in a location that can sufficiently support the combined weight of the stand and the display.

(b)The installation location should be a completely flat and stable surface. Take proper precautions when installing the stand to make sure that the weight of the display is equally distributed throughout the stand.

(c)Do not install this stand outdoors, at a hot spring, or near a beach.

(d)Do not install this stand where it may be subjected to vibration or shock.

5.(a) Assemble the stand in accordance with all of the instructions and securely stabilize the stand with screws at all locations that are indicated.

There have been cases where after installing the display, damage has occurred from the stand fall- ing over or similar situations.

(b)To assure that the display is installed safely, installa- tion should be performed with more than two people.

(c)Before installation, turn off the power for the dis- play and peripheral devices, then remove the power cord plug from the power outlet.

10