3.After assembling, connect the stand to the floor to prevent from falling over.

7 Stabilizing to the floor

Use screws (sold separately) to attach and stabilize the stand.

7Sample use of the stabilization bolts (50” display model is shown in the figure.)

1.Attach the stabilization bolts that come with the plasma display.

2.Stabilize the display by connecting to a wall or standing beam with a strong cord.

(Repeat the same steps in the laterally direction to stabi- lize the assembly to the left and right.)

Use cord and hooks that are available on the market (sold sepa- rately).

1

2

English

7 Installation coordinates for screws used to stabilize the stand to the floor

*When stabilizing the stand to the floor, use M6 with a length above 20 mm (25/32 inch). Units: mm (inch)

 

485 (19-3/32) [50” display]

248 (9-3/4)

17/32)(264-

411 (16-3/16) [43” display]

 

275(10-13/16)

7Specifications

Dimensions ..............................

566 (W) x 508

(H) x 339 (D) mm

 

(22-9/32 (W) x

20 (H) x 13-11/32 (D) in.)

Weight ......................................

4.0 kg (8.82 lb)

.....................................

42.9 kg (94.58 lb) (When the 50” plasma display is attached)

 

35.5 kg (78.27 lb) (When the 43” plasma display is attached)

11.5 (29/64)

15