English
Controls
SCREEN
The position of the image can be adjusted and flickering of the image can be corrected.
Example: Adjusting the vertical position
On “VIDEO WALL” menu, select “SCREEN”, then press the MENU/SET button.
The “SCREEN” screen appears.
On “V.POSITION” of “SCREEN” menu, adjust the position.
|
|
| SCREEN |
|
|
|
|
|
|
|
|
| SCREEN SIZE |
| : | 4 : 3 |
|
|
|
|
|
| |
| V. POSITION |
|
|
|
|
|
|
|
|
|
|
| H. POSITION |
|
|
|
|
|
|
|
|
|
|
| V. SIZE |
|
|
|
|
|
|
|
|
|
|
| H. SIZE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| AUTO PICTURE |
| : | OFF |
|
|
|
| |||
| PHASE |
|
|
|
|
|
|
|
|
| |
| CLOCK |
|
|
|
|
|
| V.POSITION |
| +64 | |
|
|
|
|
|
|
|
| ||||
| SEL. | ADJ. | EXIT RETURN |
|
|
|
| ||||
Information
SCREEN settings
These are the same functions as the SCREEN menu on page 16.
P. ON DELAY (Power on delay)
Use this function to activate
Turn on the AUTO ID before the following operations.
Example: Setting “ON”
On “P. ON DELAY” of “VIDEO WALL” menu, select “ON”.
| VIDEO WALL |
|
DIVIDER | : | 1 |
POSITION |
|
|
DISP. MODE | : | NORMAL |
AUTO ID | : | OFF |
ABL LINK
Use this function to set a uniform brightness for each display.
Turn on the AUTO ID and set the DIVIDER (at 1, 4 or 9) before the following operations.
Example: Setting “ON”
On “ABL LINK” of “VIDEO WALL” menu, select “ON”, then press the MENU/SET button.
|
|
| VIDEO WALL |
| |
| DIVIDER |
| : | 1 | |
| POSITION |
|
|
| |
| DISP. MODE |
| : | NORMAL | |
| AUTO ID |
| : | OFF | |
| SCREEN |
|
|
| |
| P. ON DELAY |
| : | OFF | |
| ABL LINK |
|
| : | ON |
| REPEAT TIMER |
| : | OFF | |
| SEL. | ADJ. | EXIT RETURN | ||
|
|
|
|
|
|
Information
ABL LINK settings
ON: Sets a uniform brightness for each screen in a video wall. This can be set only when a 2⋅2 or 3⋅3 video wall is selected.
OFF: Sets the individual screen brightness for each screen in a video wall.
*When this function is set “ON”, connect your plasma
displays with the remote cable (optional) in the order of the position numbers for the 2⋅2 video wall. See the drawing below.
*If there are changes in the DIVIDER or POSITION, the ABL LINK will automatically turn OFF.
OSD (On Screen Display)
SCREEN |
|
|
| |
P. ON DELAY |
|
| : | ON |
ABL LINK |
| : | OFF | |
REPEAT TIMER |
| : | OFF | |
SEL. | ADJ. | EXIT RETURN | ||
Information
P. ON DELAY settings
ON: Turns on the main power of each display after a delay time.
REMOTE IN
REMOTE OUT
No.1 No.2
No.4 No.3
Display 1
No.1 No.2
No.4 No.3
Display 4
REMOTE
OUT
REMOTE IN
REMOTE
OUT
REMOTE 
IN
No.1 No.2
No.4 No.3
Display 2
No.1 No.2
No.4 No.3
Display 3
REMOTE OUT
REMOTE IN
26
OFF: Turns on the main power of all displays at the same time.
(Only for 16 and 25 screens)
MODE1: Turns on the main power of each display delayed.
MODE2: Turns on the main power of each display more delayed.
*Once this function has been set to “ON”, the POWER ON/OFF button on the remote control does not function except for the No.1 monitor.
By pressing the POWER ON button on the remote control the No.1 monitor will turn on and the others will be turned on one by one automatically.
*From the second monitor onward, neither the POWER button on the unit nor the POWER ON button on the remote control works. However, by pressing and holding the POWER ON button for more than 3 seconds, the monitor will be turned on.
*With the 3⋅3 video wall, connect the final display to the first display the same way as with 2⋅2 video wall.
Note: The remote control can be operated unless the IR REMOTE is set to “OFF”.
En
