Pioneer PDP 424MV specifications Specifications, Signals

Specifications

English

Specifications

Screen Size		36.3"(H)20.4"(V) inches
		921(H)518(V) mm
		diagonal 42"
	Aspect Ratio	16 : 9
Resolution		853(H)480(V) pixels

Signals

Synchronization Range Horizontal : 15.5 to 110 kHz

	(automatic : step scan)
	Vertical : 50.0 to 120 Hz
	(automatic : step scan)
Input Signals	RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
	PAL60, SECAM, HD*1 , DVD*1 , DTV*1

Input Terminals (VIDEO1 and PC1 can also be used as OUTPUT terminals)

		PC
		Visual 1 (Analog)	mini D-sub 15-pin1
		Visual 2 (Analog)	BNC (R, G, B, H/CS, V)1*2
		Visual 3 (Digital)	DVI-D 24-pin1*3
		Video
		Visual 1	BNC1
		Visual 2	RCA-pin1
		Visual 3	S-Video: DIN 4-pin1
		COMPONENT
		Visual 1	RCA-pin (Y, PB[CB], PR[CR])1*1
		Visual 2	BNC (Y, PB[CB], PR[CR])1*1, *2
		Audio	Stereo RCA3 (Selectable)
		RS-232C	D-sub 9-pin1
	Sound output		8W+8W at 6 ohm
Power Supply			AC100-240V 50/60Hz
Current Rating			4.5A (maximum)
Power Consumption			270W (standby 0.9W)
Dimensions			40 (W)24 (H)3.5 (D) inches
			1018 (W)610 (H)89 (D) mm
	Weight		62.8 lbs / 28.5 kg (without stand)
Environmental Considerations
		Operating Temperature	0°C to 40°C / 32°F to 104°F

Other Features Motion compensated 3D Scan Converter (NTSC, PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3 pull down Converter (NTSC, 480I, 525I, 1035I, 1080I (60Hz)), 2-2 pull down Converter (PAL, 576I, 625I, NTSC, 480I, 525I), Digital Zoom Function (100-900% Selectable), Video Wall 4-25 multi screen, Self Diagnosis, Image Burn reduction tools (ABL LOCK1~3, INVERSE, WHITE, ORBITER (Auto1,2/Manual), SCREEN WIPER), Color Temperature select (high/mid/mid low/low, user has 4 memories), Key lock (Except power SW), Auto Picture, Input Skip, Color Detail Adjustment, Low Tone (3 mode), Auto ID, Programmable Timer, Gamma Correction

(4 mode), Loop through interface, Plug and play (DDC1, DDC2b, PC3: DDC2b only)

	35	54
1018 (40")	(1.38")
		(2.13")
	610 (24")
		89
		(3.5")
	Units are in mm
		(inch)

The features and specifications may be subject to change without notice.

*1HD/DVD/DTV input signals supported on this system

480P (60 Hz)	480I (60 Hz)
525P (60 Hz)	525I (60 Hz)
576P (50 Hz)	576I (50 Hz)
625P (50 Hz)	625I (50 Hz)
720P (60 Hz)	1035I (60 Hz)
1080I (50 Hz)	1080I (60 Hz)

*2The 5-BNC connectors are used as PC2 and

COMPONENT2 input. Select one of them under “BNC INPUT”.

*3Compatable with HDCP.

Supported Signals

• 640 480P @ 59.94/60Hz		• 1920 1080I @ 50Hz
• 1280	720P @ 59.94/60Hz	• 720 576P @ 50Hz
• 1920	1080I @ 59.94/60Hz	• 1440 (720) 576I @ 50Hz

•720 480P @ 59.94/60Hz

•1440 (720) 480I @ 59.94/60Hz

Note: In some cases a signal on the plasma monitor may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc...). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

32

En