Pioneer PRO-530HDI, PRO-730HDI Cable Control Buttons, CH channel +, buttons, Source Power button

1

2

3

Mode switch

REMOTE CODE SET UP

CABLE CONTROL BUTTONS

CABLE, SAT and DTV cannot be selected at the same time.

When the mode switch is set to CBL/SAT the cable converter connected to the Monitor can be operated using the buttons

1to 5.

Cable converters which are made by other makers and are not preset can also be operated using the remote control unit if buttons 1 to 5 have learnt the functions (see page 84).

1Direct channel selection buttons

Press the button (or buttons) that corresponds to the channel that you wish to watch.

2CH (channel) +, – buttons

Press plus (+) or minus (–) to tune in a higher or lower

4 channel.

5	3 SOURCE POWER button
	Turns the power of the cable converter on and off.

4CH ENTER button *

Fix the selected channel with the direct channel selection buttons.

5CH RETURN (channel return) button *

Press to switch between the current channel and the channel you were watching immediately before.

*Some manufacturers do not preset CH ENTER and CH RETURN. Use these buttons to learn if necessary.

VARIOUS FUNCTIONS

87