Manuals / Pioneer / Car Audio and Video / Car Amplifier

Pioneer PRS-A500 Installation, Example of installation on the floor mat or on the chassis

Models: PRS-A500

1 62
Download 62 pages 17.61 Kb
Page 10
Image 10

Installation

CAUTION

• Do not install in:

—Places where it could injure the driver or pas- sengers if the vehicle stops suddenly.

—Places where it may interfere with the driver,

such as on the floor in front of the driver’s seat.

•Make sure that wires are not caught in the sliding mechanism of the seats, resulting in a short-cir- cuit.

•Confirm that no parts are behind the panel when drilling a hole for installation of the amplifier. Protect all cables and important equipment such as fuel lines, brake lines and electrical wiring from damage.

•Install tapping screws in such a way that the screw tip does not touch any wire. This is impor- tant to prevent wires from being cut by vibration of the car, which can result in fire.

•DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could become hot to the touch and minor burns could result.

•To ensure proper installation, use the supplied parts in the manner specified. If any parts other than the supplied ones are used, they may damage internal parts of the amplifier, or they may become loose causing the amplifier to shut down.

•Never replace the fuse with one of greater value or rating than the original fuse. Use of an improp- er fuse could result in overheating and smoke and could cause damage to the product and injury including burns.

CAUTION:

To prevent malfunction and/or injury

•To ensure proper heat dissipation of the amplifier, be sure of the following during installation.

—Allow adequate space above the amplifier for proper ventilation.

—Do not cover the amplifier with a floor mat or carpet.

•DO NOT allow amplifier to come into contact with liquids due to, for example, the location where the amplifier is installed. Electrical shock could result. Also, amplifier and speaker damage, smoke, and overheating could result from contact with liquids. In addition, the amplifier surface and the surface of any attached speakers could

become hot to the touch and minor burns could result.

•Do not install the amplifier on unstable places such as the spare tire board.

•The best location for installation differs with the car model and installation location. Secure the amplifier at a sufficiently rigid location.

•Make temporary connections first and check that the amplifier and the system operate properly.

•After installing the amplifier, confirm that the spare tire, jack and tools can be easily removed.

Example of installation on the floor mat or on the chassis

1.Place the amplifier where it is to be

installed. Insert the supplied tap- ping screws (4 ⋅ 18 mm) into the screw holes. Push on the screws with a screwdriver so they make marks where the installation holes are to be located.

2.Drill 2.5 mm diameter holes at the point marked, and install the ampli- fier, either on the carpet or directly to the chassis.

Tapping-screws (4 ⋅ 18 mm)

Floor mat or chassis

Drill a 2.5 mm diameter hole

9

Page 9 Page 11
Page 10
Image 10
Pioneer PRS-A500 Installation, Example of installation on the floor mat or on the chassis, Tapping-screws 4 ⋅ 18 mm
Page 9 Page 11

PRS-A500 specifications

The Pioneer PRS-A500 is an exceptional addition to the world of car audio amplifiers, designed for enthusiasts seeking high-performance sound quality in their vehicles. Known for its power, versatility, and innovative technologies, this amplifier elevates the listening experience for any audio aficionado.

One of the standout features of the PRS-A500 is its robust power output. The amplifier delivers a peak power rating of 500 watts, ensuring that it can effectively drive high-performance speakers and subwoofers. Its ability to operate in both 2-channel and 4-channel configurations allows users to tailor their audio system to their specific needs, making it an ideal choice for a range of setups.

In terms of design, the PRS-A500 is built with high-quality components that enhance its overall durability and reliability. The amplifier uses a heat sink that efficiently dissipates heat, ensuring that the unit remains cool even during extended use. This durability is critical for maintaining performance over time and minimizing the risk of thermal shutdown.

The amplifier is equipped with advanced technologies that help deliver clear and dynamic sound reproduction. The inclusion of a built-in crossover allows users to control the frequency range sent to their speakers, optimizing performance based on the desired audio configuration. This feature is particularly useful for customizing the sound output to fit various genres of music.

Additionally, the PRS-A500 incorporates sophisticated signal processing capabilities. Its low-noise design ensures that the sound remains clear without the interference often found in lesser models. This is complemented by a high signal-to-noise ratio, providing a listening experience free from distortion and unwanted noise, allowing audiophiles to appreciate every nuance of their favorite tracks.

Installation is made simple thanks to user-friendly features like RCA inputs and an intuitive wiring layout. This amplifier also supports a variety of speaker configurations, further enhancing its appeal to a diverse range of users.

Overall, the Pioneer PRS-A500 is a powerful, versatile, and technologically advanced amplifier that meets the demands of car audio enthusiasts. Its combination of high power output, reliability, and customizable features make it a standout option for anyone looking to enhance their mobile audio experience. With the PRS-A500, users can expect nothing less than a thrilling auditory experience on the road.