Connecting the Unit

CAUTION

•Disconnect the negative (–) terminal of the bat- tery to avoid the risk of short-circuit and damage to the unit.

•Secure the wiring with cable clamps or adhesive tape. To protect the wiring, wrap adhesive tape around it where they lie against metal parts.

•Do not route wires where they will get hot, for example where the heater will blow over them. If the insulation heats up, it may become damaged, resulting in a short-circuit through the vehicle body.

CAUTION:

To prevent damage and/or injury

•Do not ground the speaker wire directly or con- nect a negative (–) lead wire for several speakers.

•This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recre- ational vehicle, truck or bus, check the battery voltage.

•If the car stereo is kept on for a long time while the engine is at rest or idling, the battery may go dead. Turn the car stereo off when the engine is at rest or idling.

•If the system remote control wire of the amplifier is connected to the power terminal through the ignition switch (12 V DC), the amplifier will always be on when the ignition is on— regardless of whether the car stereo is on or off. Because of this, the battery could go dead if the engine is at rest or idling.

•Make sure that wires will not interfere with mov- ing parts of the vehicle, such as the gearshift, handbrake or seat sliding mechanism.

•Do not shorten any wires. Otherwise the protec- tion circuit may fail to work when it should.

•Never feed power to other equipment by cutting the insulation of the power supply wire to tap from the wire. The current capacity of the wire will be exceeded, causing overheating.

•Never replace the fuse with one of greater value or rating than the original fuse. Use of an improp- er fuse could result in overheating and smoke and could cause damage to the product and injury including burns.

•Speakers to be connected to the amplifier should conform with the standards listed below. If they do not conform, they may catch fire, emit smoke

or become damaged. The speaker impedance must be 2 to 8 Ω for stereo connection, and 4 to 8 Ω for monaural and other bridge connection.

•Install and route the separately sold battery wire as far away as possible from the speaker wires. Install and route the separately sold battery wire, ground wire, speaker wires and the amplifier as far away as possible from the antenna, antenna cable and tuner.

•Cords for this product and those for other prod- ucts may be different colors even if they have the same function. When connecting this product to another product, refer to the supplied Installation manuals of both products and connect cords that have the same function.

Speaker Channel	Speaker Type	Power
Two-channel	Subwoofer	Nominal input: Min. 120 W

	Other than subwoofer	Max. input: Min. 200 W
	Other than subwoofer	Max. input: Min. 200 W

One-channel	Subwoofer	Nominal input: Min. 420 W

	Other than subwoofer	Max. input: Min. 600 W
	Other than subwoofer	Max. input: Min. 600 W

PRS-A500 specifications

The Pioneer PRS-A500 is an exceptional addition to the world of car audio amplifiers, designed for enthusiasts seeking high-performance sound quality in their vehicles. Known for its power, versatility, and innovative technologies, this amplifier elevates the listening experience for any audio aficionado.

One of the standout features of the PRS-A500 is its robust power output. The amplifier delivers a peak power rating of 500 watts, ensuring that it can effectively drive high-performance speakers and subwoofers. Its ability to operate in both 2-channel and 4-channel configurations allows users to tailor their audio system to their specific needs, making it an ideal choice for a range of setups.

In terms of design, the PRS-A500 is built with high-quality components that enhance its overall durability and reliability. The amplifier uses a heat sink that efficiently dissipates heat, ensuring that the unit remains cool even during extended use. This durability is critical for maintaining performance over time and minimizing the risk of thermal shutdown.

The amplifier is equipped with advanced technologies that help deliver clear and dynamic sound reproduction. The inclusion of a built-in crossover allows users to control the frequency range sent to their speakers, optimizing performance based on the desired audio configuration. This feature is particularly useful for customizing the sound output to fit various genres of music.

Additionally, the PRS-A500 incorporates sophisticated signal processing capabilities. Its low-noise design ensures that the sound remains clear without the interference often found in lesser models. This is complemented by a high signal-to-noise ratio, providing a listening experience free from distortion and unwanted noise, allowing audiophiles to appreciate every nuance of their favorite tracks.

Installation is made simple thanks to user-friendly features like RCA inputs and an intuitive wiring layout. This amplifier also supports a variety of speaker configurations, further enhancing its appeal to a diverse range of users.

Overall, the Pioneer PRS-A500 is a powerful, versatile, and technologically advanced amplifier that meets the demands of car audio enthusiasts. Its combination of high power output, reliability, and customizable features make it a standout option for anyone looking to enhance their mobile audio experience. With the PRS-A500, users can expect nothing less than a thrilling auditory experience on the road.

Pioneer PRS-A500 owner manual Connecting the Unit, To prevent damage and/or injury

Models: PRS-A500