Setting the Unit
• To adjust the switch, use standard tip screwdriver if needed.
Power Indicator
The power indicator lights when the power is switched on.
Subsonic Select Switch
The subsonic filter cuts inaudible frequencies below 20 Hz to elimi- nate unwanted vibrations and min- imize power loss.
Bass Boost Control
You can select a bass boost level from 0, 6, 9 and 12 dB.
For instruction of connecting the bass boost remote control to the amplifier, see the “Connection Diagram” section.
Top Cover
Before setting up the unit, unfasten the screws with a 4 mm hexagonal wrench and remove the top cover.
BFC (Beat Frequency Control) Switch
BFC switch is on the bottom of the unit. If you hear a beat while listening to an AM broadcast with your car stereo, change the BFC switch using a small standard tip screwdriver.
3
