Pioneer PRS-D1200M owner manual Four Amplifier Ex. Bridge, English Español Deutsch Français

Four Amplifier (Ex. Bridge)		Connect to a car stereo.
MODE SELECT switch
	SYNC OUT	For details, see the
must be in MASTER position.		“Connection Diagram”.

	Connecting wire with RCA
	pin plugs (sold separately).
Connecting speaker wire (sold separately).
MODE SELECT switch must be
in SYNC INV position.	SYNC OUT

	SYNC IN	Connecting wire with
		RCA pin plugs (sold
2 Ω to 16 Ω		separately).
	MODE SELECT switch must be
	in SYNC INV position.
	SYNC OUT	SYNC IN

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

Connecting wire with RCA

pin plugs (sold separately).

Connecting speaker wire (sold separately).

MODE SELECT switch must be in SYNC INV position.

SYNC IN

•Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple speakers with a bridge, check that the synthetic impedance is at least 2 Ω.

•The setting of the POWER MODE switch varies according to the speaker impedance. Slide the POWER MODE switch to the HI-CURRENT position if the impedance is from 2 Ω to less than 4 Ω, or slide it to the NORMAL position if the impedance is from 4 Ω to 16 Ω. The same setting is used for four amplifiers.

•When switching to the SYNC INV mode, the stopper over the MODE SELECT switch must be removed and you can find SYNC INV switch. Remove the stopper after checking that connections are correct.

ITALIANO NEDERLANDS êìëëäàâ

12