Bi-wiring Connections

Bi-wiring requires two cables for each speaker, one for high frequencies and one for low frequencies. Using separate cables for the high end and low end improves the sound.

Speaker

Speaker

 

Amplifier

Black Red

Black Red

R ch L ch

Tweeter amp

Speaker

R ch L ch

Black Red

Woofer amp

R ch L ch

Speaker

Black Red

1Loosen the cap knobs on the left input terminals and remove the two short bars.

In this state, the low-frequency speakers and the higher- frequency speakers are completely independent. Store the short bars in a safe place for later use. The lower terminals are for the bass, and the upper terminals are for midrange and treble sounds.

2Insert a speaker cable into each of the terminal post holes, then tighten the knobs.

Red terminal (￿)

Black terminal (￿)

High frequency terminals

Low frequency terminals

Attaching and removing the front grille

The front grille of this speaker system is removable. Follow the instructions below to attach/remove the grilles.

Attaching the grille

1Insert the supplied fastening screws into the four holes provided on the front of the speaker.

Use your fingers (not a screwdriver) to secure the screws to the front of the speaker.

Caution: when bi-wiring

Note that in this setup, connecting the cables with the polarity reversed may seriously degrade the tone; refer to the section "Connecting the cables" again and confirm that the cables are connected properly.

3Connect the matched pairs to the same speaker terminals on your amp (taking care not to get the polarity reversed).

Make sure to use the same type of cable for the low-fre- quency and the same type for the high-frequency connec- tions.

When bi-amping

Bi-amping is an even more powerful way of connecting your speakers. Just as with bi-wiring, the input terminal short bars are removed, but here the low-frequency terminals are connected to a separate, dedicated low-frequency amp, and the high-frequency terminals are connected to a dedicated high-frequency amp.

2Line up the holes on the grille with the protruding ends of the screws on the front of the speaker and press firmly.

3Insert the supplied finishing screws into the four holes on the front of the grille and tighten to secure. Use your fingers to tighten the finishing screws.

Finishing screws

4

En

Page 4
Image 4
Pioneer S-7EX manual Attaching and removing the front grille, Bi-wiring Connections, Attaching the grille, When bi-amping

S-7EX specifications

The Pioneer S-7EX represents a remarkable advancement in speaker technology, delivering an unparalleled auditory experience for music enthusiasts and home theater aficionados alike. This floor-standing speaker is engineered to provide exceptional clarity and depth across the frequency spectrum, making it a perfect choice for those who appreciate high-fidelity sound.

One of the standout features of the Pioneer S-7EX is its proprietary driver technology. It is equipped with a 6.5-inch woofer that employs a rigid, lightweight cone design, allowing it to produce deep, impactful bass without distortion. Coupled with a 5-inch midrange driver, the S-7EX excels in rendering vocal and instrumental nuances, ensuring that every note is heard with precision. The speaker also boasts a 1-inch soft dome tweeter, providing smooth high-frequency response and a natural sound signature that complements the overall sonic profile.

The S-7EX utilizes advanced acoustic engineering techniques, including a finely tuned bass reflex system. This design enhances bass response while minimizing unwanted resonance, resulting in a cleaner, more dynamic performance. The speaker’s cabinet is constructed from dense MDF material, further reducing vibration and enhancing audio fidelity. This attention to detail in both internal components and cabinet design contributes to a rich listening experience, whether for music, movies, or gaming.

Another notable characteristic of the Pioneer S-7EX is its versatility in placement. With an elegant yet unobtrusive aesthetic, it can seamlessly integrate into various home environments. The speaker's compact design makes it suitable for both small and large spaces, allowing users to enjoy high-quality sound without sacrificing style.

Connectivity is also a crucial aspect of the S-7EX. The speakers are designed to work effortlessly with a variety of amplifiers and receivers. Their impedance rating and sensitivity ensure compatibility across a wide range of audio setups, making them an excellent choice for both casual listeners and audiophiles alike.

In summary, the Pioneer S-7EX stands out in the crowded speaker market due to its innovative driver technology, superior acoustic engineering, and elegant design. Whether you are a dedicated music lover or a home theater enthusiast, the S-7EX delivers an immersive audio experience that is truly hard to beat. It embodies Pioneer’s commitment to quality and performance, making it a worthy addition to any audio system.