Pioneer S-IC621D Introduction, Before you start, For U.S. model, Wash hands after handling

Thank you for buying this Pioneer product.

Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

Introduction

This speaker system is designed for in-ceiling installation. The design features provide for a wide range of placement and listening position options.

Providing excellent sound quality, these models feature an adjustable tweeter to provide flexibility of placement in your listening area.

This speaker system is also paintable so that they may be matched to your room decor.

Before you start

•The nominal impedance of this speaker system is 8 Ω. Connect the speaker system to an amplifier capable of driving an impedance of at least 8 Ω.

This product incorporates auto-resetting overload protection technology to help avoid damage to the speakers. However, please observe the following precautions:

•Do not supply amplification power to the speaker system in excess of the maximum permissible input, which could damage the speaker and cause a hazard from overheating.

•If using a graphic equalizer to boost sounds in the high-frequency range, do not use excessive amplifier volume.

•Do not try to force a low-powered amplifier to produce high sound levels as the amplifier’s harmonic distortion will be increased, and you may damage the speaker.

Caution: installation

•Pioneer is not responsible for any accidents or damage that result from improper installation, misuse, modification of the product, or natural disasters.

•This speaker system must be installed by a qualified technician as it involves such tasks as selecting a location for installation, drilling holes in walls/ceiling, wiring, and painting. Have the installer carefully follow the installation instructions.

•The installation technician must follow professional installation techniques to protect the speaker system against falling.

•When installing the speakers, make sure that the wall/ceiling is strong enough to support the speakers.

•Improper installation of the speakers could cause them to fall and cause damage or injuries to persons nearby.

•Switch off and unplug your AV equipment and consult the instructions when connecting up components. Make sure you use the correct connecting cables.

•Keep magnetic objects such as screwdrivers or steel parts away from the tweeter and woofer speakers. Since the speakers use strong magnets, the objects may be attracted, causing injury or damaging the diaphragm.

•Do not install the speakers where they will be in direct sunlight, and avoid positioning them near heaters and air conditioners. This may cause warping and discoloration of the speaker and damage to the speakers.

•Though this speaker system can be used in humid areas (such as bathrooms or kitchens), do not install it where it may be exposed to high temperatures, such as in a sauna or near a cooking area, or where water could splash on the speaker, which is not waterproof.

Caution: in use

•If the speakers stop emitting sound after receiving too large an input signal, turn down the volume control on the amplifier and wait a few seconds. The protection feature will be reset automatically.

For U.S. model

WARNING: Handling the cord on this product or cords associated with accessories sold with the product will expose you to chemicals listed on proposition 65 known to the State of California and other governmental entities to cause cancer and birth defect or other reproductive harm.

Wash hands after handling D36-P4_A_En

2

En