•When installing below the TV
Attach bracket so that the speaker terminal is on its left when viewing the back of the speaker.
Speaker terminal
Top
Bottom
7 Secure brackets together with screws.
Secure the brackets together by using the supplied screws (short) at the screw holes located on the top of the left and right side of the brackets.
If you cannot secure both sides (due to such cases as lack of space to use a screwdriver), make sure that one side is secured with a screw.
English Franaçis Español
•When installing above the TV
Attach bracket so that the speaker terminal is on its right when viewing the back of the speaker.
Speaker terminal
Top
Bottom
6 Attach speaker onto bracket (for wall).
Place the bottom left edge of the bracket (attached on the speaker) on top of the guide of the bracket (for wall) from a diagonal angle (
).
Bring right side of both brackets together so that they become horizontal to each other (
).
Move slightly to the left and slide down until stops, while aligning the left protruding section to the groove of the bracket (for wall)
(
).
•The following illustration does not show the speaker attached to the bracket (for speakers) for description purposes.
2
3
1 |
Guide
8 Secure speaker to wall with a cord.
Screw two picture hooks or similar into the wall behind the speaker. Pass a thick cord (not provided) around the hooks and through the metal catch so that the speaker is stabilized (make sure to test that it supports the weight of the speaker).
Metal catch
Sufficiently thick cord (not provided)
•Do not attach the metal catch directly to the wall. It should only be used in conjunction with reinforced string to prevent the speaker from falling.
5
En
