XP SBC RU 885
6ENGLISH
Add device
1Look up the brand name of the device you wish to operate in the code list (centre of this manual).
2Switch on the device you wish to add.
3Press and hold SETUP until SETUP lights up in the display.
➜DEV (first line)
➜ADD (second line)
4Confirm with SEND.
➜SAT (second line)
5Use SMART CONTROLS to select the device to be added.
➜CABLE (for example - second line)
6Confirm with SEND.
➜CODE (first line)
7Use the Numeric keys to enter the code.
➜1234 (for example - second line)
8Confirm with SEND.
➜STORED (second line)
9Press any key to check if the code is correct and your device responds.
If the device does not respond or if not all keys function properly the code is not correct. In this case see ‘Change device code’ hereafter.
Remove device
1Press and hold SETUP until SETUP lights up in the display.
➜DEV (first line)
➜ADD (second line)
2Use SMART CONTROLS to select REMOVE.
➜REMOVE(second line)
3Confirm with SEND.
➜TV (second line)
4Use SMART CONTROLS to select the device to be removed.
➜VCR (for example - second line)
5Confirm with SEND.
➜REMOVED (second line)
Change device code
1If the entered code is not correct look up the next code in the code list (centre of this manual).
2Press and hold SETUP until SETUP lights up in the display.
➜DEV (first line)
➜ADD (second line)
3Use SMART CONTROLS to select CODE.
➜CODE (second line)
4Confirm with SEND.
➜TV (second line)
5Use SMART CONTROLS to select the device for which you wish to change the code.
➜VCR (for example - second line)
6Confirm with SEND.
➜CODE (first line)
7Use the Numeric keys to enter the new code.
➜1234 (for example - second line)
8Confirm with SEND.
➜STORED (second line)
9Press any key to check if the code is correct and your device responds.
If the device still does not respond or if not all keys function properly repeat the steps above using the next code in the code list.
If the correct code cannot be found in the code list see chapter ‘Autosearch’ hereafter.
