Chapter

Setting rear view camera

08

The following two functions are available. The rear view camera feature requires a separately sold rear view camera (e.g. ND-BC4). (For de- tails, consult your dealer.)

Rear view camera

This product features a function that automatically switches to the full-screen image of the rear view camera installed on your vehicle. When the shift lever is in the REVERSE (R) po- sition, the screen automatically switches to full-screen rear view camera image.

Camera for Rear view mode

Rear view can be displayed at all times (e.g. when monitoring an attached trailer, etc.). Please be aware that with this setting, camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable.

CAUTION

Check to make sure settings for rear view camera displays a mirror reversed image.

pImmediately verify whether the display changes to a rear view camera image when

the shift lever is moved to REVERSE (R) from another position.

pWhen the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in “Rear Camera”.

1Press the Home button to display the Home screen.

2Tap on the Home screen.

3Tap [General].

4Tap .

5Tap [Rear Camera].

You can select the following polarity:

!OFF (default):

Select when the rear view camera is not connected.

!Normal:

Displays the rear view camera image with- out change.

Select “Normal” in the following case:

!When the rear view camera is con- nected to display a mirror reversed image.

!When the polarity of the connected lead is positive while the shift lever is in the REVERSE (R) position

!Normal(GND):

Displays the rear view camera image with- out change.

Select “Normal(GND)” in the following case:

!When the rear view camera is con- nected to display a mirror reversed image.

!When the polarity of the connected lead is negative while the shift lever is in the REVERSE (R) position

!Mirror:

Displays the rear view camera image in mir- ror reverse.

Select “Mirror” in the following case:

!When the rear view camera is con- nected to display a normal image.

!When the polarity of the connected lead is positive while the shift lever is in the REVERSE (R) position

!Mirror(GND):

Displays the rear view camera image in mir- ror reverse.

Select “Mirror(GND)” in the following case:

!When the rear view camera is con- nected to display a normal image.

!When the polarity of the connected lead is negative while the shift lever is in the REVERSE (R) position

camera view rear Setting

En 19