Pioneer SVM-1000 33

USING THE JPEG VIEWER

Operating in FADER MODE

Using the JPEG images in the JPEG BOX, a slide show can be

created with transitions between images at chosen intervals. The channel fader for the assigned channel is used to perform the transitions.

1Touch the [FADER MODE] button to select FADER mode.

2Select the images you wish to use from the JPEG BOX. Touch multiple images on the screen and their borders will change to white. Touch again to deselect images.

3Select the channel to which you wish to assign the images. Touch the channel select button for the channel to which you wish to assign the images, and the image at the upper left of the group of selected images will be displayed on the channel monitor.

4Operate the fader.

Each time the channel fader for the assigned channel is raised from the [0] point, the images will change.

Deleting JPEG files downloaded to the JPEG BOX

1Touch the [CLEAR] button. The [CLEAR] button will flash.

2Touch the images on the screen that you wish to delete. The instant the image is touched, it disappears from the JPEG BOX. While the [CLEAR] button is flashing, you may continue by deleting other images if desired.

•This process does not affect file data on attached SD cards or USB memory devices.

3Press the [CLEAR] button once again to leave this mode.

•Usable JPEG files have a maximum size of 7 MB or about 12 MP.

•If the original JPEG file does not fit within 640 x 480 pixels, the file will be automatically resized to 640 x 480 pixels when downloaded to the SVM-1000.