04Controls and displays
10 MCACC SETUP MIC jack
Use to connect the supplied microphone.
11 PHONES jack
Use to connect headphones. When the headphones are connected, there is no sound output from the speakers.
12Listening mode buttons
AUTO SURR/STREAM DIRECT – Switches between Auto surround mode (Auto playback on page 30) and Stream Direct playback. Stream Direct playback bypasses the bass/treble controls for the most accurate reproduction of a source (page 33).
HOME THX – Press to select a Home THX listening mode (page 31).
STANDARD SURROUND – Press for Standard decoding and to switch between the various 2 Pro Logic IIx and Neo:6 options (page 30).
ADVANCED SURROUND – Use to switch between the various surround modes (page 31).
STEREO/A.L.C. – Switches between stereo playback, Auto level control stereo mode and Front Stage Surround Advance modes (page 32).
13
If you’ve made
14 SPEAKERS
Use to change the speaker system (page 59).
15 ST +/–
Use to select preset radio stations (page 36).
Operating range of remote control unit
The remote control may not work properly if:
•There are obstacles between the remote control and the receiver’s remote sensor.
•Direct sunlight or fluorescent light is shining onto the remote sensor.
•The receiver is located near a device that is emitting infrared rays.
•The receiver is operated simultaneously with another infrared remote control unit.
30° 30°
7 m (23 ft.)
26
En