Additional information

13

Chapter 13:

Additional information

Troubleshooting

Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized independent service company to carry out repair work.

Power

Symptom

Remedy

The power does not turn on.

• Make sure that the power cable is plugged in to an active power outlet.

 

• Try disconnecting from the power outlet, then plugging back in.

 

 

The receiver suddenly switches

• Check that there are no loose strands of speaker wire touching the rear panel or another set of

off or the PHASE CONTROL

wires. If so, re-attach the speaker wires, making sure there are no stray strands.

indicator blinks.

• The receiver may have a serious problem. Disconnect from the power and call a Pioneer authorized

 

independent service company.

 

 

During loud playback the

• Turn down the volume.

power suddenly switches off.

• Lower the 63 Hz and 125 Hz equalizer levels in the Manual MCACC setup on page 42.

 

• Try switching on the digital safety feature (put the receiver into standby, hold down the

 

ADVANCED/SURROUND button on the front panel and press  STANDBY/ON to switch between

 

SAFETY 1 ON (medium effect), SAFETY 2 ON (more effect) and SAFETY OFF). If the power switches

 

off even with SAFETY 2 ON, turn down the volume. With SAFETY 1 ON or SAFETY 2 ON on, some

 

features may be unavailable.

 

 

The unit does not respond

• Try switching the receiver off, then back on again.

when the buttons are pressed.

• Try disconnecting the power cable, then connect again.

 

 

AMP ERR blinks in the display,

• The receiver may have a serious problem. Do not try switching the receiver on. Contact a Pioneer

then the power automatically

authorized independent service company for help.

switches off. The MCACC

 

blinks and the power does not

 

turn on.

 

 

 

AMP OVERHEAT blinks in the

• Allow the unit to cool down in a well-ventilated place before switching back on. Check the safety

display, then the power

precautions on page 2 for information on improving heat dispersal.

automatically switches off.

 

 

 

Display blinks 12 TRG ERR.

• An error has arisen in the 12 V trigger jacks. Reconnect accurately then turn the power back on.

 

 

The receiver suddenly switches

• The receiver may have a serious problem. Do not try switching the receiver on. Contact a Pioneer

off or DIGITAL PRECISION

authorized independent service company for help.

PROCESSING indicator blinks.

 

 

 

No sound

Symptom

No sound is output when an input source is selected.

No sound output from the front speakers.

Remedy

Check the volume, mute setting (press MUTE) and speaker setting (press SPEAKERS).

Make sure the correct input source is selected.

Check that the MCACC setup microphone is disconnected.

Make sure the correct input signal is selected (press SIGNAL SEL). Note that when PCM is selected, you won’t be able to hear any other signal format.

Check that the source component is connected properly (see Connecting your equipment on page 13).

Check that the speakers are connected properly (see Connecting the speakers on page 21).

83

En

Page 83
Image 83
Pioneer VSX-03TXH manual Additional information Chapter, Troubleshooting, Power, No sound

VSX-03TXH specifications

The Pioneer VSX-03TXH is a versatile and powerful AV receiver designed to elevate your home entertainment experience. Known for its robust build quality and advanced features, the VSX-03TXH caters to audiophiles and casual viewers alike, providing rich audio and immersive surround sound capabilities.

One of the standout features of the VSX-03TXH is its 9.2-channel high current amplification, which delivers 130 watts per channel. This allows for a dynamic soundstage and excellent power handling, ensuring that every detail in your favorite movies and music is accurately reproduced. The receiver supports various audio formats, including Dolby Atmos, DTS:X, and IMAX Enhanced, enabling an immersive audio experience that makes you feel like you are part of the action.

Additionally, the VSX-03TXH comes equipped with Pioneer's proprietary MCACC (Multichannel Acoustic Calibration System). This technology analyzes the acoustic characteristics of your room and automatically adjusts speaker settings to optimize sound quality. This means you can enjoy the best possible audio performance, regardless of your room's layout.

The connectivity options on the VSX-03TXH are extensive, featuring multiple HDMI inputs and outputs, including support for 4K video pass-through, HDR, and HDCP 2.2. This ensures that your receiver is future-proof and can handle the latest video technology, making it a perfect match for modern 4K TVs and gaming consoles. Furthermore, the receiver supports HDBaseT, which allows for long-distance audio and video transmission, making installation more flexible.

In terms of streaming capabilities, the VSX-03TXH is equipped with Wi-Fi, Bluetooth, and Chromecast built-in, providing seamless access to your favorite music streaming services. Users can enjoy wireless listening and even multi-room audio with the help of compatible devices. The receiver also includes various digital and analog inputs, making it easy to connect a range of media devices.

The elegant design of the VSX-03TXH features an intuitive user interface and a clear, informative display that simplifies navigation. This allows you to quickly adjust settings or switch inputs without hassle. Overall, the Pioneer VSX-03TXH represents a powerful combination of high-end audio technology, robust functionality, and user-friendly features, making it an excellent choice for any home theater system.