Pioneer VSX-03TXH manual Sirius radio messages

Additional information 13

Symptom	Cause
CH Unavailable	The selected channel is not available. The channel
	may have been reassigned to a different channel
	number.
	This message may occur initially with a new radio or
	a radio that has not received XM’s signal for an
	extended period.

Action

Consult the latest channel guide at www.xmradio.com for the current list of channels. For cases of a new radio or a radio that has not received XM’s signal for an extended period, allow the radio to receive the XM satellite signal for at least 5 minutes and then try to select the channel again.

– – – – – – – –	No artist name or song title is available for this	No action required.
	selection.
Upgrade XM Tuner	The connected XM CNP-1000 is incompatible. This	Contact XM Listener Care (1-800-967-2346) and ask
	receiver features advanced technology that is	about upgrading your XM CNP-1000 to an XM Mini-
	designed for use with the XM Mini-Tuner.	Tuner.
		Have this receiver’s model name and CNP-1000 XM
		Radio ID number ready beforehand, and explain that
		this receiver is displaying the message Upgrade XM
		Tuner.
		If you already have an XM Mini-Tuner connected and
		you see this message, turn off this receiver, make
		sure the XM Mini-Tuner is properly seated in the
		Mini-Tuner Dock, and then turn this receiver On
		again. If the message reappears, contact XM
		Listener Care and explain the issue that you’re
		experiencing and the corrective actions you’ve tried.
XM Power Error	A short-circuit occurring in the antenna or	Make sure that there is nothing unusual with the
	surrounding antenna cable.	antenna or antenna cable. Switch the power off,
		then back on again.

SIRIUS radio messages

Symptom	Cause	Action
Antenna Error	Antenna is not properly connected.	Check that the antenna cable is attached securely.
Check Sirius Tuner	SIRIUS Connect tuner is not properly connected.	Check that the 8 pin mini DIN cable and AC Adapter
		are attached securely.
Acquiring Signal	The SIRIUS signal is too weak at the current location. n/a
Subscription Updating	Unit is updating subscription.	Wait until the encryption code has been updated.
Updating Channels	Unit is updating channels.	Wait until the encryption code has been updated.
Invalid Channel	Selected channel is not available/does not exist.	Select another channel.

Note

•If the unit does not operate normally due to external effects such as static electricity disconnect the power plug from the outlet and insert again to return to normal operating conditions.

91

En