Pioneer VSX-42 manual 42

6						Playback with NETWORK features
Parental Lock						- Try disconnecting then reconnecting the USB device
		Firmware Update
Set restrictions for using Internet services. Also set the						or storing the update file again. If the error still
		Use this procedure to update the receiver’s software.
password accompanying the usage restrictions.						occurs, try using a different USB memory device.
• Upon shipment from the factory, the password is set to		Updating via a USB memory device is performed by		4
						The software update will start. Please wait.
		downloading the update file from a computer, reading this file
“0000”.
1		onto a USB memory device then inserting this USB memory				The OSD display will turn off during update and the words
	Select ‘Network Configuration’ from the Network	device into the USB port on the receiver’s front panel. With				‘UPDATE’ will flash on the front panel.
	Setup menu.	this procedure, the USB memory device containing the
						If ‘COMPLETE’ is displayed, updating is completed.
	Select ‘Parental Lock’ from the Network Configuration	update file must first be inserted into the USB port on the			5 The screen will return automatically to the play screen.
		receiver’s front panel.
2 menu.						• If ‘FAIL’ is displayed on the front panel display,
		• If an update file is provided on the Pioneer website,
3						updating has failed. Try the following:
	Input the password.	download it onto your computer. When downloading an
						- Turn the receiver’s power off, then turn it back on
		update file from the Pioneer website onto your computer,
	Use / to select a character, / to set the position,	the file will be in ZIP format. Unzip the ZIP file before saving				and try updating the software again.
	and ENTER to confirm your selection.
		it on the USB memory device. If there are any old				- Try disconnecting then reconnecting the USB device
4
	Specify whether to turn Parental Lock on or off.	downloaded files or downloaded files for other models on				or storing the update file again. If the error still
	• OFF – Internet services are not restricted.	the USB memory device, delete them.				occurs, try using a different USB memory device.
	• ON – Internet services are restricted.		Important
5					Factory Reset
	If you want to change the password, select ‘Change	• DO NOT unplug the power cord during updating.
					Use to reset all network connection settings to their initial,
	Password’.	• Do not disconnect the USB memory device during			factory-setting condition.
	In this case, the procedure returns to step 3.
		updating.
					1 Select ‘Factory Reset’ from the Network Setup menu.
		• Verify the software version of the receiver in the System
Language
		Info menu before updating and confirm that the software			2
						Select ‘Start’.
Language can be set on the NETWORK function OSD screen.		in the USB memory device is a newer version.
		• Updating may reset the receiver’s settings to the initial,		3		Select ‘OK’ to confirm.
1 Select ‘Language’ from the Network Setup menu.
		factory-setting condition. Whether this is applicable to your				The screen will return automatically to the play screen.
		receiver can be confirmed at our Pioneer website.
2 Select the language you want.						You return to the Network Setup menu.
		1
3
	When you’re finished, press RETURN.		menu.Select ‘Firmware Update’ from the Network Setup		System Information
	You return to the Network Setup menu.		The receiver checks whether the USB memory device		The setting status of the following network-related items can
					be checked.
			inserted into the USB port on the receiver’s front panel
					• IP Address – Check the IP address of this receiver.
			contains updatable software.
					• MAC Address – Check the MAC address of this receiver.
		2 To update, select ‘Start’.
					• Release ID – Check the software version of this receiver.
			When ‘Updating in progress, don’t unplug!’ is	1
		3 displayed, select ‘OK’.				Select ‘System Info’ from the Network Setup menu.
			• If ‘File Not Found’ is displayed, try the following:			Display the setting status of the network-related items.
				2
			- No update file was found on the USB memory			When you’re finished, press RETURN.
			device. Store the file in the USB memory device’s			You return to the Network Setup menu.

root directory.

42