1

 

Controls and displays
13 SOUND RETRIEVER

Press to restore CD quality sound to compressed audio sources (page 26).

14 iPod iPhone USB terminal

Use to connect your Apple iPod or USB mass storage device as an audio source (page 17).

15 MCACC SETUP MIC jack

Use to connect a microphone when performing Auto MCACC setup (page 18).

Display16PHASE

Lights when the Phase Control is switched on (page 27).

17AUTO

Lights when the Auto Surround feature is switched on (page 25).

18 Tuner indicators

ST – Lights when a stereo FM broadcast is being received in auto stereo mode (page 24).

TUNE – Lights when a normal broadcast channel.

PRESET – Shows when a preset radio station is registered or called.

MEM – Blinks when a radio station is registered.

kHz/MHz – Lights when the character display is showing the currently received AM/FM broadcast frequency.

19 Speaker indicators

Shows if the speaker system is on or not (page 6). SPA means the speakers are switched on.

SP means the speakers are switched off.

20 Sleep timer indicator

Lights when the receiver is in sleep mode (page 8).

21 PRESET information or input signal indicator

Shows the preset number of the tuner or the input signal type, etc.

22 Character display

Displays various system information.

23 DTS indicators

DTS – Lights when a source with DTS encoded audio signals is detected.

HD – Lights when a source with DTS-EXPRESS or DTS-HD encoded audio signals is detected.

ES – Lights to indicate DTS-ES decoding.

96/24 – Lights when a source with DTS 96/24 encoded audio signals is detected.

NEO:6 – When one of the NEO:6 modes of the receiver is on, this lights to indicate NEO:6 processing (page 25).

24 Dolby Digital indicators

2D – Lights when a Dolby Digital encoded signal is detected.

2D+ – Lights when a source with Dolby Digital Plus encoded audio signals is detected.

2HD – Lights when a source with Dolby TrueHD encoded audio signals is detected.

EX – Lights to indicate Dolby Digital EX decoding.

2PLII(x) – Lights to indicate 2Pro Logic II/2Pro Logic IIx decoding. Light will go off during 2Pro Logic IIz decoding (see Listening in surround sound on page 25 for more on this).

25ADV.S.

Lights when one of the Advanced Surround modes has been selected (see Using the Advanced surround on page 26 for more on this).

26 SIGNAL SELECT indicators

DIGITAL – Lights when a digital audio signal is selected. Blinks when a digital audio signal is selected and selected audio input is not provided.

HDMI – Lights when an HDMI signal is selected. Blinks when an HDMI signal is selected and selected HDMI input is not provided.

27 Up Mix/DIMMER indicator

Lights when the Up Mix function is set to ON (page 27). Also, lights when DIMMER is set to off.

28DIR.

Lights when the DIRECT or PURE DIRECT mode is switched on (page 26).

7