![07Using the tuner](/images/new-backgrounds/30111/3011167x1.webp)
07Using the tuner
Listening to the radio
The following steps show you how to tune to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. Once you are tuned to a station you can memorize the frequency for recall
Manual tuning
To change the frequency one step at a time, press the TUNING +/– buttons.
High speed tuning
Press and hold the TUNING + / – buttons for high speed tuning. Release the button at the frequency you want.
TUNER
TUNING
BANDMPX
Improving FM stereo sound
If the TUNED or STEREO indicators don't light when tuning to an fm station because the signal is weak, press the MPX button to switch the receiver into mono reception mode. This should improve the sound quality and allow you to enjoy the broadcast.
1Press the TUNER button on the remote control to select the tuner.
You can also use the MULTI JOG/INPUT SELECTOR dial on the front panel.
2Use the BAND button to change the band (FM or AM), if necessary.
Each press switches the band between FM and AM.
3Tune to a station.
There are three ways to do this:
Automatic tuning
To search for stations in the currently selected band, press and hold the TUNING
+/ – buttons for about a second. The receiver will start searching for the next station, stopping when it has found one. Repeat to search for other stations.
34
En