Pioneer vsx-d512, vsx-d412, audio/video multi-channel receiver manual Controls and displays Display

04Controls and displays

Display

1

SIGNAL AUTO

DIGITAL DIGITAL

ANALOG DTS

2	3	4	5	6	7	8	9
	DIGITAL		ATT	DIRECT	MONITOR
	PROLOGIC			MIDNIGHT		STEREO	TUNED
	ADV.SURR.			LOUDNESS		MONO	SP	A
								dB

10

1 SIGNAL SELECT indicators

Lights to indicate the type of input signal assigned for the current component:

AUTO : Lights when AUTO signal select is on.

DIGITAL : Lights when a digital audio signal is detected.

2DIGITAL : Lights when a Dolby Digital signal is detected.

ANALOG : Lights when an analog signal is detected.

DTS : Lights when a source with DTS audio signal is detected.

2 DTS

When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal.

3 2 DIGITAL

When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal.

4 2 PRO LOGIC II

When the Standard mode of the receiver is on, this lights to indicate Prologic II decoding.

11 12 13 14

5 ATT

Lights when INPUT ATT is used to attenuate (reduce) the level of the input signal (can only be used with an analog signal).

6 DIRECT

Lights when source direct playback is in use. Direct playback bypasses the tone controls and channel levels for the most accurate reproduc- tion of a source.

7 MIDNIGHT

Lights during Midnight listening.

8 MONITOR

Lights when MONITOR is selected.

9 Speaker indicator

Shows if the speaker system is on or not.

SP 3A means speakers are switched on. SP 3 means the headphones are connected.

10Character display

11ADV. SURR. (Advanced Surround) Lights when one of the Advanced Surround listening modes of the receiver is selected.

28

En