Installation

Installation

Connecting the Units

Note:

This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage.

To avoid shorts in the electrical system, be sure to disconnect the · battery cable before begin- ning installation.

Refer to each product’s manual for details on connecting the power amp and other units, then make connections correctly.

Secure the wiring with cable clamps or adhe- sive tape. To protect the wiring, wrap adhesive tape around them where they lie against metal parts.

Route and secure all wiring so it cannot touch any moving parts, such as the gear shift, hand- brake and seat rails. Do not route wiring in places that get hot, such as near the heater out- let. If the insulation of the wiring melts or gets torn, there is a danger of the wiring short- circuiting to the vehicle body.

Don’t pass the yellow lead through a hole into the engine compartment to connect to the bat- tery. This will damage the lead insulation and cause a very dangerous short.

Do not shorten any leads. If you do, the protec- tion circuit may fail to work when it should.

Never feed power to other equipment by cut- ting the insulation of the power supply lead of the unit and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.

When replacing fuse, be sure to use only fuse of the rating prescribed on the fuse holder.

If the RCA pin jack on the unit will not be used, do not remove the caps attached to the end of the connector.

To prevent incorrect connection, the input side of the IP-BUS or optical cable connector is blue, and the output side is black. Connect the connectors of the same colors correctly.

If this unit is installed in a vehicle that does not have an ACC (accessory) position on the igni- tion switch, the red lead of the unit should be connected to a terminal coupled with ignition switch ON/OFF operations. If this is not done, the vehicle battery may be drained when you are away from the vehicle for several hours.

 

 

CC

 

 

 

 

 

 

 

 

 

F

A

O

 

 

 

F

O

 

 

 

 

N

 

N

O

F

 

 

 

 

O

F

 

 

 

 

 

 

 

S

 

 

 

S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

T

 

 

 

 

T

 

 

 

 

R

A

 

 

 

R

A

 

 

 

T

 

 

 

T

 

ACC position

No ACC position

Cords for this product and those for other products may be different colors even if they have the same function. When con- necting this product to another product, refer to the supplied Installation manuals of both products and connect cords that

have the same function.

63

Page 66
Image 66
Pioneer XDV-P90 owner manual Connecting the Units, Installation

XDV-P90 specifications

The Pioneer XDV-P90 is a remarkable digital media player that showcases advanced technology and a suite of features designed for superior audio and video playback. This device has garnered attention for its impeccable performance and user-friendly design, appealing to audio enthusiasts and casual listeners alike.

One of the standout features of the XDV-P90 is its high-resolution audio capability, supporting a wide range of file formats including FLAC, WAV, MP3, and AAC. This versatility allows users to enjoy their favorite music without compromising quality. The player incorporates advanced digital-to-analog converters (DACs) that enhance sound fidelity, delivering crisp highs and deep lows, ensuring a superior listening experience.

The XDV-P90 is equipped with a vibrant LCD display that enhances usability. This display provides an intuitive interface to navigate menus and settings, allowing users to quickly access their music library, adjust sound settings, and customize their audio experience. Additionally, the screen's resolution contributes to a visually engaging interaction with the device.

Wireless connectivity is another hallmark of the XDV-P90. With built-in Bluetooth support, users can effortlessly stream music from their smartphones or other devices, eliminating the clutter of cables. The player also features USB ports for connecting external storage devices, enabling quick access to a large library of media files.

In terms of sound enhancement, the Pioneer XDV-P90 includes a range of audio processing technologies such as a 13-band graphic equalizer and customizable presets. This allows users to tailor their listening experience to match their personal preferences or the acoustics of their environment. Furthermore, the player supports various surround sound formats, making it suitable for home theater applications.

The XDV-P90 also emphasizes durability and design. Its sturdy construction ensures that it can withstand the rigors of everyday use while maintaining an aesthetically pleasing appearance that fits well in both contemporary and classic setups. Compact and stylish, this digital media player easily integrates with other components of a sound system.

In summary, the Pioneer XDV-P90 is a cutting-edge digital media player that combines high-resolution audio playback, advanced connectivity options, and customizable sound settings. Its blend of innovative technology, user-friendly design, and robust features makes it a top choice for anyone looking to elevate their audio experience, whether at home or on the go.