3
En
240V
110-127V
220-230V
VOLTAGE
SELECTOR
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE PIONEER PRODUCT.
Pioneer is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological
developments. We are sure you will be fully satisfied with the DVD player. Thank you for your support.
Please read through these operating instructions so
you will know how to operate your model properly.
After you have finished reading the instructions, put
them away in a safe place for future reference.
•This player is not suitable for commercial use.
LINE VOLTAGE SELECTOR SWITCHOnly multi-voltage model is provided with this
switch.
Mains voltages in Saudi Arabia are 127 V and
220 V only. Never use this model with the 110 V
setting in Saudi Arabia. H019 En
The line voltage selector switch is located on the rear panel.
Check that it is set properly before plugging the power cord into
the outlet. If the voltage is not properly set or if you move to an
area where the voltage requirements differ, adjust the selector
switch as follows:
¶Be sure to disconnect the power cord from its outlet before
making this adjustment.
¶Use a medium-sized (flat blade) screwdriver. Insert the tip
of the screwdriver into the groove of the selector switch and
turn it so that the power voltage marking of your area points
to the arrow.
CAUTION 220 – 230 V
Power source voltage is factory adjusted 220 - 230 volts.
If your area is different, change voltage selectors set-
tings. H038 En