Customizing preferences
Chapter
31
4 Touch [+] or
pThe estimated time of arrival is not necessa- rily estimated based on this speed value.
5 Touch [OK].
The settings are completed.
Setting the Volume for
Guidance and Phone
The sound volume for the navigation can be set. You can separately set the volume of the route guidance and the beep sound.
1Display the “System Settings” screen.
=For details, refer to Displaying the “System Settings” screen on page 161.
2Touch [Volume].
The “Volume Settings” screen appears.
3 Touch [+] or
!Phone Voice
This setting controls the incoming voice vo- lume.
p“Phone Ringtone” and “Phone Voice” ad- justments are related to the cellular phone featuring Bluetooth technology. No adjust- ment is needed when the cellular phone featuring Bluetooth technology is not con- nected.
pVolume of the AV source is adjusted by the VOL
=For details, refer to Checking part names and functions on page 12.
#Touch the key next to “Beep”.
Each time you touch the key changes that set- ting.
!On (default):
A beep sounds.
!Off:
The beep sound is muted.
#Touch the key next to “VR Beep”.
Each time you touch the key changes that set- ting.
!On (default):
Voice recognition beep is enabled.
!Off:
Voice recognition beep is disabled.
4 To finish the setting, touch [OK].
preferences Customizing
On this screen, you can operate the following items.
!Guidance
This setting controls the guidance volume of navigation.
p When set to 
, guidance is output. When set to 
, no guidance is output.
!Phone Ringtone
This setting controls the incoming ring tone volume.
Changing the preinstalled splash screen
You can change the splash screen to the other images preinstalled in the navigation system.
1Display the “System Settings” screen.
=For details, refer to Displaying the “System Settings” screen on page 161.
2Touch [Splash Screen].
The “Select Splash Screen” screen appears.
3Touch the image to use as the splash screen from the list.
The image is displayed on the screen.
En 163