| Chapter |
Customizing preferences | 31 |
pImmediately verify whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position.
pWhen the screen changes to
2 Touch [Screen Calibration].
A message confirming whether to start the calibration appears.
3Gently touch the center of + mark dis- played on the screen.
The target indicates the order.
After you touch all marks, the adjusted posi- tion data is saved.
1Display the “System Settings” screen.
=For details, refer to Displaying the “System Settings” screen on page 161.
2Touch [Back Camera].
The “Back Camera Settings” screen appears.
3Touch [Camera] change the setting to “On”.
p You can only switch to “Rear View” if this setting is “On”.
4Touch [Polarity] to select an appropriate setting for polarity.
Each time you touch [Polarity] switches be- tween the following polarity:
!Battery: When the polarity of the con- nected lead is positive while the shift lever is in the REVERSE (R) position
!GND: When the polarity of the connected lead is negative while the shift lever is in the REVERSE (R) position
pDo not turn off the engine while saving the adjusted position data.
#Press the MODE button.
Returns to the previous adjustment position.
#Press and hold the MODE button. Cancels the adjustment.
Setting the illumination color
The illumination color can be selected from 10 different colors. Furthermore, the illumination color can be switched between these 10 colors in order.
Selecting the color from the preset colors
1Display the “System Settings” screen.
=For details, refer to Displaying the “System Settings” screen on page 161.
2Touch [Illumi Color].
The “Illumination Color” screen appears.
preferences Customizing
Adjusting the response positions of the touch panel (touch panel calibration)
If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen.
pDo not use a sharp pointed tool such as a ballpoint pen or a mechanical pen, which could damage the screen.
1Display the “System Settings” screen.
=For details, refer to Displaying the “System Settings” screen on page 161.
3 Touch the color you want.
Available options:
!Colored keys: Selects the desired preset color
!Memory 1/Memory 2 : Colors registered in the memory
En 165