MODEL SG6H FRYER

INSTALLATION

WARNING

If your appliance is uses line current, it is equipped with an oil proof, electrical supply cord with a three-prong safety plug. This is to protect operators from electrical shock hazard in the event of an equipment malfunction. DO NOT cut or remove the grounding (third) prong from this plug; it should be plugged into a properly grounded three-prong receptacle.

1.6. VENTILATION AND FIRE SAFETY SYSTEMS

Your new appliance must have proper ventilation to function safely and properly. Exhaust gas temperatures can reach as high as 1100 °F (593 °C). Therefore, it is very important to install a fire safety system. Your ventilation system should be designed to allow for easy cleaning. Frequent cleaning and proper maintenance of the ventilation system and the appliance will reduce the chances of fire. Ventilation and fire safety systems must comply to local and national codes. Refer to ANSI

83.11for a list of reference documents that will provide guidance on ventilation and fire safety systems. For installations in U.S. and Canada, additional information can be obtained from CSA International, 8501 East Pleasant Valley Road, Cleveland, OH, 44131 or visit their website at www.csa-international.org.

It is essential that the appliance be operated only when adequate ventilation is provided. Your ventilation hood should be properly maintained. A qualified installation professional should ensure that the hood is operating properly in conjunction with the appliance. Inadequate ventilation may not properly evacuate appliance all emissions. Excessive or unbalanced ventilation may cause drafts, which could interfere with proper operation of the pilot and burners. Leave at least 18 inches (45.72cm) of open space between the flue of the appliance and the intake of the exhaust hood.

WARNING

Ensure that your ventilation system does not cause a down draft at the appliance’s flue opening. A down draft will not allow the appliance to exhaust properly and will cause overheating, which may cause permanent damage. Damage caused by down drafts will not be covered by the warranty. NEVER allow anything to obstruct the flow of combustibles or ventilation exiting the appliance. NEVER place anything on top of the flue area, or block the flue in any way. Never place a grease condensating drip pan over the flue opening.

WARNING

NEVER connect the ventilation blower or hood directly to the flue of this appliance. The resulting increased flow of air through the combustion system will cause improper operation, poor temperature recovery, poor ignition and could extinguish the pilot.

1.7. INSPECTION

Before you begin filling and adjusting the appliance, perform the following visual checks:

After the appliance is in its permanent location, check the levelness. Any additional leveling that is necessary can be performed as previously described.

Ensure that the probe and high temperature limit is in place and secure. Check the high limit bulb mounting screws to ensure that they are tight.

Review the installation portion of this manual and ensure that all steps have been followed and executed properly.

1) Probe

2) High Temperature Limit

L20-332, rev. 1 (05/11)

7

Page 10 Page 12
Page 11
Image 11
Pitco Frialator L20-332 manual Ventilation and Fire Safety Systems, Inspection
Page 10 Page 12

L20-332 specifications

The Pitco Frialator L20-332 is an exceptional commercial deep fryer designed for high-volume frying operations. Delivers reliability, efficiency, and advanced technology tailored for busy kitchens, this unit is a top choice for restaurants, cafes, and catering services. Its robust construction and innovative designs make it ideal for frying a variety of foods, from crispy French fries to golden chicken wings.

One of the standout features of the L20-332 is its high production capacity. With a generous 40 lbs. oil capacity per tank, the fryer is capable of supporting large batches, making it possible to keep up with customer demand during peak hours. The fryer is equipped with two fry tanks, providing a total oil capacity of 80 lbs., which allows chefs to prepare multiple items simultaneously, enhancing productivity and efficiency.

The Pitco Frialator L20-332 incorporates advanced heating technology that ensures even heating throughout the oil. This unit utilizes a highly efficient gas burner system that optimizes energy consumption while delivering consistent frying temperatures. The ability to quickly recover heat after food is added ensures that cooks maintain optimal frying conditions without significant temperature drops, which is crucial for achieving perfectly cooked food.

Additionally, this fryer features a durable stainless steel exterior that not only enhances its aesthetic appeal but also makes it easy to clean and maintain. The stainless steel construction resists rust and corrosion, ensuring longevity even in the busiest kitchen environments. Its adjustable legs allow for easy installation and adaptability to various kitchen layouts.

Safety is paramount in any commercial kitchen, and the L20-332 addresses this with effective features such as an integrated high-limit temperature control and a manual reset for safe operation. An easily accessible drain valve simplifies oil changes and maintenance, allowing for efficient cleaning routines.

Easy-to-use controls provide operators with precise temperature settings and cooking times, ensuring consistency and quality in every dish. The design of the fryer also includes a built-in filtration system that extends oil life and boosts the flavor of fried products, resulting in cost savings for the business.

In summary, the Pitco Frialator L20-332 is a powerful and reliable deep fryer equipped with advanced features designed for high-volume cooking. Its combination of efficient heating technology, user-friendly controls, and durable materials make it an ideal addition to any commercial kitchen looking to maximize productivity while delivering exceptional food quality.
Top Page Image Contents