Pitco Frialator PE14D installation instructions L80-045Rev0 11/07

14.Apply the new manual fill option overlay (A6066901) to the new manual fill option bezel (B3615401-C). With a 3/8” wrench, remove the four kep nuts that hold the controller to the original bezel and install it onto the new bezel using the original hardware.

15.Reconnect the controller plug and mount the bezel using the original hardware. Install the fill knob and tighten the set screw. Make sure the knob only travels within the markings of the overlay.

16.If a water source is available, hook it up and inspect all connection points for leaks. If a water source is not available fill the tank with water and inspect all connection points below the water line.

L80-045 Rev0 (11/07) 10