Installation Instructions
N900
series install
Use these instructions if you have a N921, 35kg scale
The scale looks like this:
Note: The weighing platform |
|
and control module are |
|
separate units connected by | Control |
a single cable. | module |
Weighing platform
1.Make sure you have:
✓Scale control module and platform
✓Power Supply Unit (in its own box)
✓User Guide
✓Rate PROM
✓Meter Cable (only if you ordered a Pitney Bowes Postage Meter at the same time as your scale)
Power Supply
Unit
User Guide
Rate PROM | Meter Cable |
2. Locate and level the weighing platform
Place the platform within cable reach of the Control Module. Ensure the platform location is a flat, stable surface, free of draughts and the platform is not touching objects that may affect the weight reading.
Lift the cover straight up from the platform unit. Level the platform by turning its feet until the levelling bubble is centred and the platform doesn’t wobble.
✘ ✔
Page 11