Installation Instructions

N500/600/700

series install

9. Connect the meter cable to the postage meter

If using a postage meter, connect the large end of the meter cable to the the meter as shown. Tighten the thumbscrews securely.

If your postage meter is fitted with an optional Datalink unit, connect the large end of the meter cable to the lower connector on the Datalink unit. Tighten the thumbscrews securely.

DM series

B900

B900 Datalink

B700

10.Plug power supply unit into outlet

Plug the power supply unit into the wall outlet and turn power on. After a short power-up sequence, the display appears as shown.

Note: If the scale does not power-up, check that the power cable is firmly attached to the scale. Also check that the wall outlet you are using has power by plugging in another device.

Page 9